jarkle Posted July 12, 2023 Share Posted July 12, 2023 Like the title says. Is it possible these errors were caused by the upgrade? Attaching diag. unraid1-diagnostics-20230711-2242.zip Quote Link to comment
JorgeB Posted July 12, 2023 Share Posted July 12, 2023 BTRFS error (device sdc1): block=77279330304 write time tree block corruption detected This usually means bad RAM or other kernel memory corruption, start by running memtest You also need to change docker network from macvlan to ipvlan. Quote Link to comment
jarkle Posted July 13, 2023 Author Share Posted July 13, 2023 The error BTRFS Errors started after the upgrade. I've now switched back to 6.11.5 and have had zero of these errors. I also attempted 6.12.x when it was in beta and had the same issue so switched back to 6.11.5... I will try the memory test and see what it finds. I keep reading/seeing that I should switch to ipvlan but I've not seen a valid reason that I "need" to. I've tried switching a few times but every time I do my dockers on br0 lose access to the host even though 'Host access to custom networks' is set to true so I always end up switching back to macvlan. Quote Link to comment
the1poet Posted July 13, 2023 Share Posted July 13, 2023 (edited) On 7/12/2023 at 1:52 PM, jarkle said: Like the title says. Is it possible these errors were caused by the upgrade? Attaching diag. unraid1-diagnostics-20230711-2242.zipUnavailable Hey, I've been experiencing the same issues since upgrading my primary server to 6.12.x. Didn't before the update. Might have to role back as well 2nd time this week. Deleted my docker image and restored data, but not going to bother if it seems there's bugs with this release. Edited July 13, 2023 by the1poet Quote Link to comment
jarkle Posted July 13, 2023 Author Share Posted July 13, 2023 3 hours ago, the1poet said: Hey, I've been experiencing the same issues since upgrading my primary server to 6.12.x. Didn't before the update. Might have to role back as well 2nd time this week. Deleted my docker image and restored data, but not going to bother if it seems there's bugs with this release. Glad to know I'm not the only one! Quote Link to comment
ToyasDhake Posted July 28, 2023 Share Posted July 28, 2023 Exact same here, I am getting btrfs errors on 6.12.x, but when I role back to 6.11.5 everything is back to normal. I tried 6.12.0, 6.12.1 and 6.12.2 same thing each time. Zero issues on 6.11.5 for past few weeks. Quote Link to comment
jarkle Posted July 28, 2023 Author Share Posted July 28, 2023 12 minutes ago, ToyasDhake said: Exact same here, I am getting btrfs errors on 6.12.x, but when I role back to 6.11.5 everything is back to normal. I tried 6.12.0, 6.12.1 and 6.12.2 same thing each time. Zero issues on 6.11.5 for past few weeks. Have you tried the memtest that was suggested by JorgeB? I haven't gotten around to it myself.. Quote Link to comment
jarkle Posted July 28, 2023 Author Share Posted July 28, 2023 On 7/13/2023 at 3:20 AM, the1poet said: Hey, I've been experiencing the same issues since upgrading my primary server to 6.12.x. Didn't before the update. Might have to role back as well 2nd time this week. Deleted my docker image and restored data, but not going to bother if it seems there's bugs with this release. Have you tried the memtest that was suggested by JorgeB? Quote Link to comment
jarkle Posted July 28, 2023 Author Share Posted July 28, 2023 Just to inform, I'm still BTRFS error free after switching back to 6.11.5. Quote Link to comment
ToyasDhake Posted August 13, 2023 Share Posted August 13, 2023 On 7/28/2023 at 1:03 PM, jarkle said: Have you tried the memtest that was suggested by JorgeB? I haven't gotten around to it myself.. No, I haven't. I read somewhere it is recommended to run it for 24 hr. I cannot have my server down for a day. And it has been stable after reverting to 6.11.5 1 Quote Link to comment
Deadfish Posted September 17, 2023 Share Posted September 17, 2023 I have started experiencing the same problem. I have run memtest for 24hr (10 passes) and it was fine. First time the SSD broke, replaced it with a new drive. Rebuilt the docker disk - was corrupt in 2 days. Not sure what to do? Memtest for more than 24 hr? Swap the CPU and motherboard? Rollback to an earlier unraid release? I am on 6.12.4 Quote Link to comment
jarkle Posted September 17, 2023 Author Share Posted September 17, 2023 4 hours ago, Deadfish said: I have started experiencing the same problem. I have run memtest for 24hr (10 passes) and it was fine. First time the SSD broke, replaced it with a new drive. Rebuilt the docker disk - was corrupt in 2 days. Not sure what to do? Memtest for more than 24 hr? Swap the CPU and motherboard? Rollback to an earlier unraid release? I am on 6.12.4 Can you rollback to 6.11.5? Quote Link to comment
JorgeB Posted September 18, 2023 Share Posted September 18, 2023 Some users have reported this type of error after updating to v6.12, so possibly a kernel bug that affects some corner cases, you can try downgrading or probably better convert the pool to zfs for example. Quote Link to comment
jarkle Posted December 5, 2023 Author Share Posted December 5, 2023 Do we know if this has been addressed yet or should I still pursue converting the pools to ZFS? Quote Link to comment
JorgeB Posted December 6, 2023 Share Posted December 6, 2023 That may no longer be an issue with the current kernel, at least there haven't been any recent reports. Quote Link to comment
jarkle Posted January 18 Author Share Posted January 18 Tried updating to the latest version of unraid and the issue resurfaced. Attaching diag from before rolling back to 6.11unraid1-diagnostics-20240112-1322.zip Quote Link to comment
JorgeB Posted January 19 Share Posted January 19 I would suggest recreating the pool with 6.12, you also need to change the docker network to ipvlan since there are macvlan call traces. Quote Link to comment
me217 Posted March 3 Share Posted March 3 On 1/19/2024 at 5:35 AM, jarkle said: Tried updating to the latest version of unraid and the issue resurfaced. Attaching diag from before rolling back to 6.11unraid1-diagnostics-20240112-1322.zip did you find any sollution to this issue? as i seem to be having a very similar issue. might try rolling back to 6.11 if possible. Quote Link to comment
jarkle Posted March 13 Author Share Posted March 13 On 3/3/2024 at 5:13 AM, me217 said: did you find any sollution to this issue? as i seem to be having a very similar issue. might try rolling back to 6.11 if possible. I converted my pools to zfs.. You might look at what they did in this thread to solve the issue though. Quote Link to comment
me217 Posted March 13 Share Posted March 13 2 hours ago, jarkle said: I converted my pools to zfs.. You might look at what they did in this thread to solve the issue though. Thanks. I have also done this. As I've found a lot of evidence btfs could be the issue. So far it's been good. But it's also not something that would show up frequently. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.