AlbinOS Posted July 15, 2023 Share Posted July 15, 2023 Hi everyone, I'm new to the Unraid sphere and enjoying it. Before putting my Unraid box in its definitive space, I tested it by connecting it directly to my router, and everything was working great. I moved my Unraid box to another room and connected it with a CAT 6 cable. Since then, it hasn't been receiving a DHCP lease. I've tested the cable using both a tester and a Windows laptop (1 gig connection), and everything works fine. Any ideas for me? The diagnostic file is in attachment. Thanks a lot ! safe-nas-diagnostics-20230714-1932.zip Quote Link to comment
AlbinOS Posted July 15, 2023 Author Share Posted July 15, 2023 I've redone the ethernet plug at both end being extra carefull and now I have "100 Mbps, full duplex, mtu 1500". I'm not sure what's happening. It's a CAT 6 cable and I have full 1000 Mbps on my windows laptop Quote Link to comment
Solution AlbinOS Posted July 15, 2023 Author Solution Share Posted July 15, 2023 I tried another redo, and now it works... I guess my crimping tools are not the best 😅 Thanks ! Quote Link to comment
itimpi Posted July 15, 2023 Share Posted July 15, 2023 3 hours ago, AlbinOS said: I tried another redo, and now it works... I guess my crimping tools are not the best 😅 Thanks ! That makes sense It can always be a bit confusing when it works at 100 Mbps and not 1000 Mbps. I think many people do not realise that you can fall back to the slower speed if any of wires within the cable are not making a proper end-to-end connection as the slower speed requires less working connections. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.