hello guys,

 

i have a question 2 days ago my unraid pc froze out of nowhere and i could not access it, so i rebooted the pc and pulled the diagnostics, can anyone tell me what happend before it froze ?

 

 

twilight-tower-diagnostics-20230725-1918.zip

The syslog included in the diagnostics only shows what has happened since the reboot as it resets every time the system is booted.  You need to enable the syslog server to get logs that survive a reboot.

alright i turned on the log server as you told me to, but the unraid pc froze again mid partity check ,

 

a month or 2 ago i also had wierd problems with this pc, like when i downgraded to more efficientness after that it started to happen

 

before this the pc randomly turned off in a frozen state, reset and power button did not work , power led and nic leds where active and lit, i had to pull the  wall plug fo abt 30 sec to able to boot the pc again, for some reason, 2 months it worked fine and now i am having a diffrent freezing, the pc and all stays on but there is no video output or anything useable, i can not log in the unraid from web , smb, and dockers are not reacable either

 

before this my unraid pc  setup was like this

 

CPU - AMD Ryzen 5 2600
CPU Cooler - AMD Wraith
Motherboard - Gigabyte Aero G x570s
Video Card - MSI GeForce GTX 1050 TI GAMING X, 4GB
Memory - Corsair Vengeance LPX 32GB (4x8GB) DDR4 3600 (CMK16GX4M2Z3600C18)
Expansion Card - DELL/LSI SAS 9207-8i IT Mode SATA/SAS 6Gb/s PCI-E 3.0 Host Bus Adapter 27NFF
Expansion Card - Intel RAID Storage Expander RES2SV240 E91267-203 SAS SATA 6Gb 24 Port
Storage NVME - 1x Samsung 970 EVO 1TB
Storage SSD - 2x Samsung 870 QVO 4TB
Storage SSD - 2x Samsung 870 EVO 4TB
Storage SSD - 2x Western Digital 2TB WD Blue 3D NAND (WDS200T2B0B-00YS70)
Storage HDD - 2x TOSHIBA MG09 18TB Enterprise (MG09ACA18TE)
Storage HDD - 6x TOSHIBA MG07 14TB Enterprise (MG07ACA14TE)
Storage HDD - 4x Western Digital RED 10 TB (WD100EFAX-68LHPN0)
Case - Fractal Design Meshify 2 XL Black
Case Fan - be-Quiet Silent Wings 3 PWM 140mm (5x)
Power Supply - Seasonic Focus TX-1300 Platinum Fully Modulair (1300w)

 

and it has been downgraded to reach idle power of 50w

 

CPU - AMD Ryzen 5 5600G
CPU Cooler - AMD Wraith
Motherboard - Gigabyte Aero G x570s
Memory - Corsair Vengeance LPX 32GB (4x8GB) DDR4 3600 (CMK16GX4M2Z3600C18)
Expansion Card - DELL/LSI SAS 9207-8i IT Mode SATA/SAS 6Gb/s PCI-E 3.0 Host Bus Adapter 27NFF
Storage NVME - 1x Samsung 970 EVO 1TB
Storage SSD - 2x Samsung 870 QVO 4TB
Storage SSD - 2x Samsung 870 EVO 4TB
Storage SSD - 2x Western Digital 2TB WD Blue 3D NAND (WDS200T2B0B-00YS70)
Storage HDD - 2x TOSHIBA MG09 18TB Enterprise (MG09ACA18TE)
Storage HDD - 1x TOSHIBA MG07 14TB Enterprise (MG07ACA14TE)
Storage HDD - 3x Western Digital Ultrastar 22 TB (WUH722222ALE6L4)
Case - Fractal Design Meshify 2 XL Black
Case Fan - be-Quiet Silent Wings 3 PWM 140mm (5x)
Power Supply - Seasonic Focus PX-750 Platinum Fully Modulair (750w)

 

i have latest bios, i resetted bios twice, i dont use xmp,

i swapped ram modules arround,

i reseated the cpu

twilight-tower-diagnostics-20230726-2012.zip syslog

It seems you are having similar issues as @halorrr and myself. We are all on 6.12.3 and we experience system crashes, without anything in the log that is helpfull.

I am investigating if the USB flash drive is to blame (as the hardware is not changed). Hopefully someone can help pinpoint the issue, find the root cause. I might return to 6.11 this weekend if we cannot make any progress.

ok recently the freezing came back

wierd thing is i even took a screenshot yesterday and it uptime was 15.7hours

and the log says

 

Oct 27 08:11:05 Twilight-Tower kernel: usb 5-6-port2: disabled by hub (EMI?), re-enabling...
Oct 27 08:11:05 Twilight-Tower kernel: usb 5-6.2: USB disconnect, device number 5
Oct 27 08:11:05 Twilight-Tower usbhid-ups[32110]: nut_libusb_get_interrupt: No such device (it may have been disconnected)
Oct 27 08:11:05 Twilight-Tower kernel: usb 5-6.2: new full-speed USB device number 6 using xhci_hcd
Oct 27 08:11:05 Twilight-Tower kernel: hid-generic 0003:0764:0601.0007: hiddev97,hidraw1: USB HID v1.10 Device [CPS PR2200ELCDSXL] on usb-0000:08:00.3-6.2/input0
Oct 27 09:51:04 Twilight-Tower ntpd[1616]: no peer for too long, server running free now
Oct 27 10:48:16 Twilight-Tower emhttpd: read SMART /dev/sdk
Oct 27 11:33:54 Twilight-Tower emhttpd: spinning down /dev/sdk
Oct 27 19:45:41 Twilight-Tower file.activity: Starting File Activity
Oct 27 19:45:41 Twilight-Tower emhttpd: Starting File Activity...
Oct 27 19:45:41 Twilight-Tower file.activity: File Activity inotify starting
Oct 27 19:45:41 Twilight-Tower inotifywait[14350]: Setting up watches.  Beware: since -r was given, this may take a while!
Oct 27 19:45:42 Twilight-Tower rsyslogd: [origin software="rsyslogd" swVersion="8.2102.0" x-pid="14333" x-info="https://www.rsyslog.com"] start
Oct 27 19:45:43 Twilight-Tower root: Delaying execution of fix common problems scan for 10 minutes

 

there is nothing in the log file that recorded it besides spinning down the  /dev/sdk ,

 

 so i dont know what is goig on again, it was gone for a while the shutdown freezing

syslog-192.168.178.44.log

Unfortunately there's nothing relevant logged, this usually points to a hardware issue, one thing you can try is to boot the server in safe mode with all docker/VMs disabled, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one.

and another freezing, of my system , i wonder what cause it because it is not like it happends everyday, its been like 2 weeks or something since last wierd habit of freezing in off state

 

syslog-192.168.178.44(1).log

Still nothing relevant logged.