Zeroeth Posted August 6, 2023 Share Posted August 6, 2023 (edited) Hi! I have a new server build where I'm using a Delkin 4GB (U404TQJGR-SN000-D) USB Flash drive. The Server boots up just fine but I'm unable to see the Disk Log Information like my other servers. The Disk Log Information link is greyed out on my Flash device under the Boot Device (Main Page). What might be the reason for this? Any insights would be very helpful as I would like to go ahead get the Plus License on this USB but just wanted to make sure that this isn't an issue. Thanks in advance! asgard-diagnostics-20230806-1259.zip Edited August 6, 2023 by Zeroeth Quote Link to comment
Zeroeth Posted August 8, 2023 Author Share Posted August 8, 2023 Can anyone please advise on this? I just need to make sure that the flash disk is good to go and the greyed out Disk Log Information link is not an issue. Thanks! Quote Link to comment
Zeroeth Posted August 22, 2023 Author Share Posted August 22, 2023 Reaching out once again for this. I have already activated the plus license but would like know why the disk log information link is greyed out. Quote Link to comment
JorgeB Posted August 23, 2023 Share Posted August 23, 2023 Try booting in safe mode, if you see the same could be a specific device issue, try booting with another flash drive, no key needed, just to test. Quote Link to comment
Solution Zeroeth Posted August 25, 2023 Author Solution Share Posted August 25, 2023 (edited) @JorgeB Thankyou! It was the same in safe mode. The issue was that I had not started the array since I was running preclear on my disks, and the disk log information on the flash is only available once the array is started. I confirmed this on my test server which has a SanDisk Cruzer Blade 32gb. Edited August 25, 2023 by Zeroeth 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.