rkotara Posted August 16, 2023 Share Posted August 16, 2023 I have a btrfs cache pool of two SSD drives and got an alert about a CRC error on one drive (which shows up in smart data as 1 total). Is there any action to take here if this does not repeat? From what I've read and from the logs, it seems like it reset the link and wrote the data and I'm good for now unless it keeps happening, which is when I should reseat cables, etc... Just wanted to check with the forum if this is the right information. Thanks! (log of entire event below) Aug 15 18:57:56 Tower kernel: ata4.00: exception Emask 0x10 SAct 0x7000000 SErr 0x400100 action 0x6 frozen Aug 15 18:57:56 Tower kernel: ata4.00: irq_stat 0x08000008, interface fatal error Aug 15 18:57:56 Tower kernel: ata4: SError: { UnrecovData Handshk } Aug 15 18:57:56 Tower kernel: ata4.00: failed command: WRITE FPDMA QUEUED Aug 15 18:57:56 Tower kernel: ata4.00: cmd 61/20:c0:e0:17:46/00:00:00:00:00/40 tag 24 ncq dma 16384 out Aug 15 18:57:56 Tower kernel: res 40/00:d0:a0:15:46/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Aug 15 18:57:56 Tower kernel: ata4.00: status: { DRDY } Aug 15 18:57:56 Tower kernel: ata4.00: failed command: WRITE FPDMA QUEUED Aug 15 18:57:56 Tower kernel: ata4.00: cmd 61/20:c8:a0:16:46/00:00:00:00:00/40 tag 25 ncq dma 16384 out Aug 15 18:57:56 Tower kernel: res 40/00:d0:a0:15:46/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Aug 15 18:57:56 Tower kernel: ata4.00: status: { DRDY } Aug 15 18:57:56 Tower kernel: ata4.00: failed command: WRITE FPDMA QUEUED Aug 15 18:57:56 Tower kernel: ata4.00: cmd 61/20:d0:a0:15:46/00:00:00:00:00/40 tag 26 ncq dma 16384 out Aug 15 18:57:56 Tower kernel: res 40/00:d0:a0:15:46/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Aug 15 18:57:56 Tower kernel: ata4.00: status: { DRDY } Aug 15 18:57:56 Tower kernel: ata4: hard resetting link Aug 15 18:57:56 Tower kernel: ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Aug 15 18:57:56 Tower kernel: ata4.00: supports DRM functions and may not be fully accessible Aug 15 18:57:56 Tower kernel: ata4.00: supports DRM functions and may not be fully accessible Aug 15 18:57:56 Tower kernel: ata4.00: configured for UDMA/133 Aug 15 18:57:56 Tower kernel: ata4: EH complete Aug 15 18:57:56 Tower kernel: ata4.00: Enabling discard_zeroes_data Quote Link to comment
Solution JorgeB Posted August 16, 2023 Solution Share Posted August 16, 2023 For a single error I wouldn't do anything, if it keeps happening replace the SATA cable. Quote Link to comment
rkotara Posted August 16, 2023 Author Share Posted August 16, 2023 Will do and thanks for the quick reply! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.