August 31, 20232 yr Hello, I was hoping to have someone take a look at my diagnostics to see what I need to do with a disk that entered an error state. I was running a parity check and around 70% complete when I received an alert that Disk 1 is in error state. I checked the smart error log and it shows 1 delayed ECC and 8 rereads/rewrites errors corrected, but no uncorrected errors. In addition, I have two disks that I was planning on removing after the parity check completed. Dev1 which is already unassigned, and Disk2 which will need to be cleared and removed. tower-diagnostics-20230831-0735.zip
September 1, 20232 yr Author On 8/31/2023 at 9:54 AM, JorgeB said: Run a long SMART test on disk1, also a scrub on cache. The scrub of the cache showed 3 corrupted files, I've deleted those and it appears to be ok now. The long SMART test ran for ~24 hours but has been stuck at 100% for a few hours now. I've attached a new diagnostics output. tower-diagnostics-20230901-1051.zip
September 1, 20232 yr Wait a few more hours to see if it finishes but just based on the re-written sectors I would probably replace it.
September 2, 20232 yr Author The long test finally finished. I went ahead and ordered a drive to replace it but wanted to share the final diagnostics in case there was anything else that could be identified from the completed test. tower-diagnostics-20230902-0813.zip
September 2, 20232 yr Test complete without errors, but the time it took and the previous rewrites are not a good sign, difficult to say for sure if using that disk is still a good option.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.