Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Upgrade to 6.12.4 BTRFS Errors on cache

Featured Replies

Hello,

 

This morning I did my normal update upgrade check on my setup.

 

I went from 6.12.3 to 6.12.4 and was immediately hit with BTRFS errors on the cache drive and docker failures. I rolled back to 6.12.3 thinking it was a update bug, but the errors are still there.

 

It looks like from the forum I am not the only one seeing this pop up recently. I checked my grafana logs and everything was humming right along up until the update.

 

Below is the 6.12.4 diag and the diag after rolling back to 6.12.3.

 

I will be shutting down and running a memtest as soon as I post.

 

Thanks for the assistance.

tower-diagnostics-20230903-0808-6.12.4.zip tower-diagnostics-20230903-0827-6.12.3.zip

  • Community Expert
Sep  3 05:17:00 Tower kernel: ata7: softreset failed (1st FIS failed)
Sep  3 05:17:00 Tower kernel: ata7: hard resetting link
Sep  3 05:17:35 Tower kernel: ata7: softreset failed (1st FIS failed)
Sep  3 05:17:35 Tower kernel: ata7: limiting SATA link speed to 1.5 Gbps
Sep  3 05:17:35 Tower kernel: ata7: hard resetting link
Sep  3 05:17:40 Tower kernel: ata7: softreset failed (1st FIS failed)
Sep  3 05:17:40 Tower kernel: ata7: reset failed, giving up
Sep  3 05:17:40 Tower kernel: ata7.00: disable device

 

Cache device is dropping offline, both with v6.12.4 and 6.12.3, replace cables and post new diags after array start.

  • Author
28 minutes ago, JorgeB said:

Cache device is dropping offline, both with v6.12.4 and 6.12.3, replace cables and post new diags after array start.

 

New cable installed. Seems to be fine.

tower-diagnostics-20230903-1557-6.12.3.zip

  • Community Expert

It didn't drop offline yet but there are still ATA errors:

 

Sep  3 13:50:42 Tower kernel: ata7.00: configured for UDMA/133
Sep  3 13:50:42 Tower kernel: sd 9:0:0:0: [sdj] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=30s
Sep  3 13:50:42 Tower kernel: sd 9:0:0:0: [sdj] tag#7 Sense Key : 0x5 [current]
Sep  3 13:50:42 Tower kernel: sd 9:0:0:0: [sdj] tag#7 ASC=0x21 ASCQ=0x4
Sep  3 13:50:42 Tower kernel: sd 9:0:0:0: [sdj] tag#7 CDB: opcode=0x28 28 00 20 05 8c 80 00 00 08 00
Sep  3 13:50:42 Tower kernel: I/O error, dev sdj, sector 537234560 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.