September 4, 20232 yr Hi, I want to hook up my new 2.5GB network card but unraid won't let me do it and the webgui will just down after that. I can connect to webgui when I disconnect the secondary ethernet port. here's my attached diagnostics. Help me. My 2.5Gb nic is : Specification: Port: 1*10/100/1000Mbps RJ45 Ethernet port, support adaptive network Chipset: RTL8125 Standard: IEEE 802.3 IEEE802.3u IEEE 802.3ab IEEE 802.3az IEEE 802.3bz Compatible slots: PCIE-16X/PCIE-18X /PCIE 4X/PCI-E-1X Internet speed: 10/100/1G/2.5Gbps paradyne-diagnostics-20230904-2016.zip
September 4, 20232 yr Community Expert Instead of a bond use the NICs separately, and use a different subnet for the other one, and no gateway.
September 4, 20232 yr Author I got it to eth1 and can access the smb but the transfer is limited to 113MB/s only. My nic is 2.5Gb network card
September 4, 20232 yr Author Solution got it!!! Sorry for the trouble. I make my new default gateway from 0.1 to 1.1 and set my address to .200 and now I can use my nic at full speed. Thank you.
September 4, 20232 yr Author The only problem is my nic is realtek and it's not that stable in transferring. I already using cache nvme drive and it's still not stable. Might need to change this nic later.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.