September 10, 20232 yr I recently repurposed my old poweredge t140 server to use unraid and run plex, radarr, sonarr, etc. I was previously using a very power hungry HP DL380P, but decided to dust this poweredge off because i realized the Xeon E-2124 3.3GHz processor supports quick sync. I followed a few different guides, installed the intel top gpu and gpu stats apps and no matter what I do I still only see card0 under /dev/dri. I read that on some other brands of servers that IPMI takes all the video output and quick sync isnt actually available, but cant find anything definitive about idrac, but I'm thinking that may be the case. Has anyone else had success using a similar set up? Here's the link to the specs for the server.
September 10, 20232 yr Community Expert 7 hours ago, joffles said: I recently repurposed my old poweredge t140 server to use unraid and run plex, radarr, sonarr, etc. I was previously using a very power hungry HP DL380P, but decided to dust this poweredge off because i realized the Xeon E-2124 3.3GHz processor supports quick sync. I followed a few different guides, installed the intel top gpu and gpu stats apps and no matter what I do I still only see card0 under /dev/dri. I read that on some other brands of servers that IPMI takes all the video output and quick sync isnt actually available, but cant find anything definitive about idrac, but I'm thinking that may be the case. Has anyone else had success using a similar set up? Here's the link to the specs for the server. I have a R420 which shows a Matrox card but my cpus don't have iGPUs, do you have an option to enable the iGPU in bios? 06:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. G200eR2 was does lspci | grep VGA show?
November 7, 20232 yr Author sorry totally missed your response! I believe I have something similar enabled. Image attached this is what that command returns 04:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. Integrated Matrox G200eW3 Graphics Controller (rev 04) Edited November 7, 20232 yr by joffles clarification
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.