Jump to content

Hardware for UnRaid with HotSwap


pawelb

Recommended Posts

Hi, I've completed hardware for my unraid system:

 

case: https://www.inter-tech.de/productdetails-144/2U-2404S_EN.html

mb: https://www.asrock.com/mb/Intel/N100M/

RAM: Patriot 16GB

Sata controller: https://axagon.eu/pl/produkty/pces-sa4x4

HDDs: https://www.toshiba-storage.com/pl/products/toshiba-internal-hard-drives-n300/ (4tb x2)

MiniSas to sata reverse cable: https://www.amazon.pl/dp/B001BIN3N6?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

After setting it up. My drives are not spinning in hotswap bays.

Trying to connect those directly to motherboard, and pcie sata controller and works fine, but tried to connect it by backplane hdds are dead.

Hardware problem or it's need some configuration?

i've got no other idea anymore. ;(

 

Thansf for answeare.

Link to comment
9 hours ago, Vr2Io said:

Did you correctly power up the backplane ?

May be reverse cable not reverse type.

Yes it has on molex connector. After boot led from bays are glowing.

reverse cable != reverse type? for me it is new types of connection. I bought 1 cable forward it was my mistake for sure, now i bought this one. From description:

 

Quote

SAS cable, Mini SAS SFF8087 (36pin) to 4x SATA, 1:1 assignment (= straight through = reverse breakout, OCR) , for connecting drives or backplanes to a host-controller with 4 SATA connectors.

 

Now I ordered exact cable described by case producer, tried to do it already but was out of stock. Now ordered it from other destination but more than one week will wait to deliver 
Stay tuned :)

Link to comment
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...