A few days ago I installed a new docker and restarted the server, and after that it didn't work. I thought it was the USB, so I changed it. Today it arrived and I configured it with a backup that I had in Unraid Connect, at first it didn't boot (it stayed frozen in the bios image), but I managed to fix it. Now my problem is that once unraid has been booted, it is as if it did not finish booting at all. It does not load the webgui, nor the dockers (or anything).

 

I found a similar case in the forum and an admin said that you had to put "df" and that if you didn't see the boot folder, something was wrong with the USB (I think this is my case). Below I leave you the logs

belgg-diagnostics-20231019-1717.zip

Edited October 19, 20232 yr by elBelgg
Typo

Try booting in safe mode, also try accessing the GUI by the IP address.

Also check that the flash drive has the label UNRAID (all capitals) as if not it will not be found to successfully finish booting and you will get the symptoms you describe.

I tried safe mode and nothing changes. I tried to connect with the server IP and it doesnt connect. 

The name of the flash drive has the proper name.

 

I noticed that if I ping it it says that the host is inaccessible (I don't know if it has anything to do with it, but I mention it just in case), and when I login it doesnt ask for password, I just type "root" and it logs me.

Edited October 19, 20232 yr by elBelgg

Try a new flash drive with a stock install, no key needed, just to see if it works.

I reinstalled the backup and now the safe mode works (only locally, idk if its suposted to work only in local or it should be also have remote access, I never used safe mode before).

Safe will also allow GUI access via browser.

Then the problem is it has no internet (it is connected directly to the router via ethernet). 

Not sure I follow, safe mode still has internet access, did you try this?

 

1 hour ago, JorgeB said:

Try a new flash drive with a stock install, no key needed, just to see if it works.

 

The original diagnostics showed that the flash drive was not being mounted at /boot. - has this been rectified?   If it has not then it would be expected that there was no GUI and no internet access.

3 minutes ago, itimpi said:

The original diagnostics showed that the flash drive was not being mounted at /boot.

Where are you seeing that? Looks mounted on the df output or am I missing something?

 

/dev/sda1        15G  424M   15G   3% /boot

 

Now it boots normal, the problem is it has no internet (only accesible from the server, not from the IP). Maybe deleting "network.cfg" and "network-rules.cfg" solves the problem, no?

Edited October 19, 20232 yr by elBelgg

In the router it says its connected, but I cant ping the server from my Pc, or the router from the server, it says its unreacheable.

10 minutes ago, elBelgg said:

Maybe deleting "network.cfg" and "network-rules.cfg" solves the problem, no?

Try that to revert to default DHCP, if it still doesn't work post new diags.

You wont believe this. I restarted the router and now it works! I realized that my plugins are not there, but I downloaded the store plugin,  went to my downloaded plugins and installed them all. Now everything is solved. Thank you so much guys!

Edited October 19, 20232 yr by elBelgg