ricostuart Posted November 7, 2023 Share Posted November 7, 2023 Hi. I had to transfer my usb key from a very old one to a newer one but I'm still getting boot issues with it. I've tried contacting support via the website as it says I cannot transfer again to another key. Can any one help? I've also wondered - is there a way of disabiling the legacy boot option on the key and have it only showing UEFI? The reason being is that the system (a QNAP NAS) wont boot from the key if the legacy boot is selected on boot devices. It works fine if UEFI selected. I can get into the bios and change the default boot order to make it goto UEFI as default (no way of disabling legacy in the bios) but if for any reason the key comes out and reinserted then the bios will rechange the priorities and have the legacy as 1 and uefi as 2. Its a pain. Quote Link to comment
JorgeB Posted November 7, 2023 Share Posted November 7, 2023 You need to contact support. Quote Link to comment
ricostuart Posted November 7, 2023 Author Share Posted November 7, 2023 8 minutes ago, JorgeB said: You need to contact support. already tried via the contact page, but got no response. been quite a number of weeks too..... I'll try again. Quote Link to comment
JorgeB Posted November 7, 2023 Share Posted November 7, 2023 That's strange, try again, you should get a response in one business day tops. Quote Link to comment
sonofdbn Posted November 7, 2023 Share Posted November 7, 2023 I had a similar problem. This might help: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.