ClutchAviator Posted December 29, 2023 Share Posted December 29, 2023 As the title says, I am just having bad luck lately with my UnRaid build. A few weeks ago, I decided to upgrade the motherboard firmware, which resulted in no post screen! I figured out what went wrong and decided to upgrade to 6.12. Two days later, one of the data drives decided to give up! So I told myself, what the heck, I’ll just get new drives and build it away! Now the challenge is, I have 1x 16TB parity with 2x 16TB data drives, one of which is bad. I bought two 18TB drives, hoping to swap the bad one with a slightly larger capacity while also upgrading that 16TB parity drive to an 18TB one. My question is, how do I go about doing it? I know how to add a larger parity drive, but I am not too sure about doing that while also swapping the bad data drive. Does anyone have a suggestion? Quote Link to comment
itimpi Posted December 29, 2023 Share Posted December 29, 2023 You can use the parity swap procedure that is for this specific Use Case. Quote Link to comment
ClutchAviator Posted December 31, 2023 Author Share Posted December 31, 2023 Thank you @itimpi, I'll follow the guide. However, I'd to replace my MOBO cause I was keep getting VFS kernel panic which I narrow it down to the faulty motherboard. That said, how do I go about accomplishing a) upgrading to the larger parity drive and b) replacing faulty data drive. I also replaced Unraid USB to a brand new Sandisk cruzer one just in case. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.