zebbl Posted February 7 Share Posted February 7 Hallo zusammen, ich habe das Problem, dass meine Disk 1 aus meinem Array seit ein paar Tagen als missing (disabled) angezeigt wird inkl. so einem komischen roten Kreuz *irrrggghhhh* Bei dem Laufwerk handelt es sich um eine interne SSD (/dev/sdb), welche xfs formatiert ist. Hatte die Platte gestern auch mal ausgebaut und mittels SATA-USB-Adapter am Windows Rechner angesteckt und da war auch noch ein Lebenszeichen da. Dann hab ich das Array mal im Maintenance Mode gestartet und ein Check Filesystem Status gemacht, mit folgenden Ergebnis: Quote Phase 1 - find and verify superblock... - block cache size set to 3046704 entries Phase 2 - using internal log - zero log... zero_log: head block 26658 tail block 26658 - scan filesystem freespace and inode maps... - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 2 - agno = 3 - agno = 1 Phase 5 - rebuild AG headers and trees... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... XFS_REPAIR Summary Wed Feb 7 20:44:30 2024 Phase Start End Duration Phase 1: 02/07 20:44:30 02/07 20:44:30 Phase 2: 02/07 20:44:30 02/07 20:44:30 Phase 3: 02/07 20:44:30 02/07 20:44:30 Phase 4: 02/07 20:44:30 02/07 20:44:30 Phase 5: 02/07 20:44:30 02/07 20:44:30 Phase 6: 02/07 20:44:30 02/07 20:44:30 Phase 7: 02/07 20:44:30 02/07 20:44:30 Total run time: done Leider kann ich daraus nix ablesen. Wie bekomme ich die Platte jetzt in meinem Array wieder zum arbeiten? Danke und viele Grüße Quote Link to comment
alturismo Posted February 8 Share Posted February 8 8 hours ago, zebbl said: ich habe das Problem, dass meine Disk 1 aus meinem Array seit ein paar Tagen als missing (disabled) angezeigt wird inkl. so einem komischen roten Kreuz *irrrggghhhh* wird diese denn überhaupt noch im Main Tab angezeigt, Bsp. unter Unassigned Devices ? wenn ja, mal das Array gestoppt und im slot die passende disk einfach mal wieder zugewiesen ? ansonsten wäre wohl eher ne diagnostics hilfreich Quote Link to comment
zebbl Posted February 8 Author Share Posted February 8 Hallo, ja das Laufwerk wird im Main Tab noch unter Array Devices angezeigt, also zumindest mit einem roten Kreuz. Unter Unassigned Devices ist es nicht zu finden. Ich habe mal ein Diagnostics durchlaufen lassen und mit angehangen. Vielen Dank für eure Hilfe zebblsunraid-diagnostics-20240208-0831.zip Quote Link to comment
hawihoney Posted February 8 Share Posted February 8 (edited) 2 hours ago, zebbl said: das Laufwerk wird im Main Tab noch unter Array Devices angezeigt Drei USB Devices. Die sind im Array/Pool nicht zu gebrauchen. RAID Systeme mit USB Devices werden Dir permanent "Spaß" bereiten und unterschiedliche Fehler generieren. Da kann Dir dann auch niemand helfen. USB Devices nur als Single Disk bzw. Unassigned Devices. Edited February 8 by hawihoney Quote Link to comment
zebbl Posted February 9 Author Share Posted February 9 Wieso 3 USB Devices? Ich habe doch nur die WD P40 per USB angeschlossen?! Und das Laufwerk was jetzt missing ist, ist eine interne SSD. Ok, der Verbund mit einer USB Platte ist jetzt vielleicht nicht optimal. Aber warum meine interne SSD jetzt missing ist, weiß ich noch immer nicht. Hab ich jetzt keine andere Möglichkeit, als das Laufwerk zu formatieren um es wieder benutzen zu können? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.