MysticRyuujin Posted February 22 Share Posted February 22 (edited) I cannot get my Unraid to negotiate a 10Gb connection on eth2 or eth3, bonded or not bonded. unraid-diagnostics-20240222-0956.zip The switch is a UniFi US 16 XG - I'm using the copper 10Gb ports. They 100% support 10GbE, I can even edit the port config and force 10Gb on the switch side but that doesn't help on the Unraid side. I haven't tried forcing 10GbE on the Unraid side, not sure if I should even attempt to do so. The Unraid shows that eth2 and eth3 are 10GbE ports, I looked at a bunch of other threads here and I checked the diagnostics before posting but it's not clear to me why this is happening. Tried a few different combinations of settings in the GUI, it just always come up 1000Mbps. The cable run is 10ft and they're brand new cat6a cables. Edited February 22 by MysticRyuujin Added info about cables Quote Link to comment
Solution Vr2Io Posted February 22 Solution Share Posted February 22 2 hours ago, MysticRyuujin said: copper 10Gb Unifi claim 2nd hardware version of 16XG have fix copper port 10G issue, check your switch HW version and get help in Unifi forum. Quote Link to comment
MysticRyuujin Posted February 22 Author Share Posted February 22 Dang, yeah, my US-16-XG is from the Beta problem, I bought it forever ago and never tried to use the copper ports. Thanks. I'll reach out to them. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.