March 6, 20242 yr I just replaced an old drive with a new larger drive. After selecting the new drive and starting the array the web interface became unavailable. I can still ssh into the node. mdcmd reports the array status as "recon D4". My unraid version is 6.12.6. Is there a way to query the time remaining from via the command line? My process for replacing the HD: Stop array Shutdown Eject old HD Insert new HD Boot system Select new HD in array list Start array At this point the web interface became unavailable Edited March 6, 20242 yr by Stu1811
March 6, 20242 yr Community Expert 19 minutes ago, Stu1811 said: Is there a way to query the time remaining from via the command line? Not AFAIK, but you can get the current position if you download the diagnostics.
March 6, 20242 yr Author 22 hours ago, JorgeB said: Not AFAIK, but you can get the current position if you download the diagnostics. DIagnostic attached. Do you know where the position data is stored? Also any idea why the web interface isn't working? Edited March 7, 20242 yr by Stu1811
March 6, 20242 yr Community Expert Solution Based on the diags the rebuild never started, it crashed partitioning the disk, and recon position is at 0, reboot and try again.
March 6, 20242 yr Author 6 hours ago, JorgeB said: Based on the diags the rebuild never started, it crashed partitioning the disk, and recon position is at 0, reboot and try again. Reboot fixed it. Thanks!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.