Server loosing power?

[fespinoza831]

I suspect my server is loosing power, just not sure how to confirm. I wake up to the server up an running fine but it will be doing a parity check. its happened a few times this week. I do have it plugged into a UPS and has a gold nzxt 750 PSU. but any suggestions on how to confirm or test my PSU. on a side note I notice a separate issue at the same time. Nvidia GPU wont be recognized but it will say that there's a new driver for me to install and that a reboot is needed and GPU wont work until I restart again. I have since change to CPU transcoding for the meantime.

plexserver-diagnostics-20240314-0728.zip

Edited March 14 by fespinoza831

[JorgeB]

44 minutes ago, fespinoza831 said:

I wake up to the server up an running fine but it will be doing a parity check.

That suggests the server is rebooting on its own, you can enable the syslog server and post that after the next time it happens, but most likely there won't be anything relevant logged, since the server rebooting on its own it's almost always a hardware problem.

[fespinoza831]

sorry I hadn't replied sooner but noticed that syslog was still enabled when I pulled that previous log. or is there a different log that you need.

[JorgeB]

There's no persistent syslog in the previous diags.

[fespinoza831]

its the same diag log or is it another log

[JorgeB]

It's a different one, if you enabled the mirror to flash drive option it will be saved to the logs folder, if it's set to save on a share it will be there.

[fespinoza831]

So I disabled the syslog and it hasnt shutdown anymore..