TheStapler Posted December 5, 2011 Share Posted December 5, 2011 Not sure what this means... but I got this today... New motherboard/CPU, running Unraid 5.0 beta 12a MOBO: ASRock H61M/U3S3 CPU: Celeron Dual Core 2.5 the onboard ETH isn't working, I am using a DLINK gig-e card Dec 4 23:29:44 Tower kernel: irq 17: nobody cared (try booting with the "irqpoll" option) Dec 4 23:29:44 Tower kernel: Pid: 0, comm: swapper Not tainted 3.0.3-unRAID #7 Dec 4 23:29:44 Tower kernel: Call Trace: Dec 4 23:29:44 Tower kernel: [<c104f684>] __report_bad_irq+0x1f/0x95 Dec 4 23:29:44 Tower kernel: [<c104f831>] note_interrupt+0x137/0x1a8 Dec 4 23:29:44 Tower kernel: [<c104e3a6>] handle_irq_event_percpu+0xef/0x100 Dec 4 23:29:44 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Quote Link to comment
TheStapler Posted December 5, 2011 Author Share Posted December 5, 2011 apparently, this also locked up the server... web gui is not respodning, but the terminal is there... SMB is down, not really quite sure what to do here? I read the other post about this, and i have already disabled the COM and the LPT, sound and onboard eth (since there wasn't a driver that worked for it yet) Quote Link to comment
TheStapler Posted December 5, 2011 Author Share Posted December 5, 2011 So, after reboot, i enabled the onboard ETH just for testing, (in my other post)... anyways, it appears unless something else caused it to move, that my DLINK is on IRQ18... Now, before I upgraded, I never had any issues. it was running in an old celeron 2.8, with 512mb ram... and never complained (except for sickbeard, as it is a HOG in resources). Would you think that the mother board is bad? or maybe my card? Quote Link to comment
prostuff1 Posted December 5, 2011 Share Posted December 5, 2011 Run memtest for 8 hours to see if it finds anything. if that does not work then try adding the irqpoll option to the syslinux.cfg file on the flash drive. Look for some other posts of mine to see where it should go. Quote Link to comment
TheStapler Posted December 6, 2011 Author Share Posted December 6, 2011 I just got this.... but i yanked the PS/2 Keyboard/mouse out of the computer... so that may have caused this issue... Dec 5 21:59:56 Tower kernel: irq 16: nobody cared (try booting with the "irqpoll" option) Dec 5 21:59:56 Tower kernel: Pid: 0, comm: swapper Not tainted 3.0.3-unRAID #7 Dec 5 21:59:56 Tower kernel: Call Trace: Dec 5 21:59:56 Tower kernel: [<c104f684>] __report_bad_irq+0x1f/0x95 Dec 5 21:59:56 Tower kernel: [<c104f831>] note_interrupt+0x137/0x1a8 Dec 5 21:59:56 Tower kernel: [<c104e3a6>] handle_irq_event_percpu+0xef/0x100 Dec 5 21:59:56 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 5 21:59:56 Tower kernel: [<c104e3db>] handle_irq_event+0x24/0x3b Dec 5 21:59:56 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 5 21:59:56 Tower kernel: [<c104fdbc>] handle_fasteoi_irq+0x69/0x82 Dec 5 21:59:56 Tower kernel: <IRQ> [<c10035c6>] ? do_IRQ+0x37/0x90 Dec 5 21:59:56 Tower kernel: [<c130b8a9>] ? common_interrupt+0x29/0x30 Dec 5 21:59:56 Tower kernel: [<c11dd945>] ? acpi_idle_enter_bm+0x22a/0x25e Dec 5 21:59:56 Tower kernel: [<c127387e>] ? cpuidle_idle_call+0x6b/0xa1 Dec 5 21:59:56 Tower kernel: [<c1001a60>] ? cpu_idle+0x3a/0x52 Dec 5 21:59:56 Tower kernel: [<c12fb388>] ? rest_init+0x58/0x5a Dec 5 21:59:56 Tower kernel: [<c1448717>] ? start_kernel+0x28c/0x291 Dec 5 21:59:56 Tower kernel: [<c14480b0>] ? i386_start_kernel+0xb0/0xb7 Dec 5 21:59:56 Tower kernel: handlers: Dec 5 21:59:56 Tower kernel: [<c1244012>] usb_hcd_irq Dec 5 21:59:56 Tower kernel: Disabling IRQ #16 here is what is IRQ16 00:1a.0 USB Controller: Intel Corporation Unknown device 1c2d (rev 05) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Unknown device 1c2d Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fe703000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features Kernel driver in use: ehci_hcd Quote Link to comment
TheStapler Posted December 7, 2011 Author Share Posted December 7, 2011 So, last night, after it had been up for 1 1/2 days without issue, I rebooted it, disabled the OB NIC (i enabled it for testing things out last time, and hadn't rebooted to turn it off). everythign came up fine, SAB/SB started up without issue.... all was good... then about 1 hour later, it crashed... Dec 6 22:53:43 Tower kernel: irq 16: nobody cared (try booting with the "irqpoll" option) Dec 6 22:53:43 Tower kernel: Pid: 1130, comm: mdrecoveryd Not tainted 3.0.3-unRAID #7 Dec 6 22:53:43 Tower kernel: Call Trace: Dec 6 22:53:43 Tower kernel: [<c104f684>] __report_bad_irq+0x1f/0x95 Dec 6 22:53:43 Tower kernel: [<c104f831>] note_interrupt+0x137/0x1a8 Dec 6 22:53:43 Tower kernel: [<c104e3a6>] handle_irq_event_percpu+0xef/0x100 Dec 6 22:53:43 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 6 22:53:43 Tower kernel: [<c104e3db>] handle_irq_event+0x24/0x3b Dec 6 22:53:43 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 6 22:53:43 Tower kernel: [<c104fdbc>] handle_fasteoi_irq+0x69/0x82 Dec 6 22:53:43 Tower kernel: <IRQ> [<c10035c6>] ? do_IRQ+0x37/0x90 Dec 6 22:53:43 Tower kernel: [<c130b8a9>] ? common_interrupt+0x29/0x30 Dec 6 22:53:43 Tower kernel: [<c118b593>] ? drive_stat_acct+0x5e/0x110 Dec 6 22:53:43 Tower kernel: [<c118c25a>] ? bio_attempt_back_merge+0x64/0x77 Dec 6 22:53:43 Tower kernel: [<c118cd41>] ? __make_request+0x78/0x200 Dec 6 22:53:43 Tower kernel: [<c118ba04>] ? generic_make_request+0x24c/0x2a9 Dec 6 22:53:43 Tower kernel: [<f858066c>] ? handle_stripe+0xc54/0xcd7 [md_mod] Dec 6 22:53:43 Tower kernel: [<c130b8a9>] ? common_interrupt+0x29/0x30 Dec 6 22:53:43 Tower kernel: [<f8580be6>] ? unraid_sync+0x32/0x42 [md_mod] Dec 6 22:53:43 Tower kernel: [<f857cb07>] ? md_do_sync+0x154/0x3ba [md_mod] Dec 6 22:53:43 Tower kernel: [<c1093abd>] ? mntput+0x19/0x1b Dec 6 22:53:43 Tower kernel: [<c103be2d>] ? wake_up_bit+0x5b/0x5b Dec 6 22:53:43 Tower kernel: [<f857d274>] ? md_do_recovery+0x115/0x197 [md_mod] Dec 6 22:53:43 Tower kernel: [<f857d274>] ? md_do_recovery+0x115/0x197 [md_mod] Dec 6 22:53:43 Tower kernel: [<f857d91c>] ? md_thread+0xcc/0xe3 [md_mod] Dec 6 22:53:43 Tower kernel: [<c103be2d>] ? wake_up_bit+0x5b/0x5b Dec 6 22:53:43 Tower kernel: [<f857d850>] ? import_device+0x142/0x142 [md_mod] Dec 6 22:53:43 Tower kernel: [<c103bb3d>] ? kthread+0x62/0x67 Dec 6 22:53:43 Tower kernel: [<c103badb>] ? kthread_worker_fn+0x10a/0x10a Dec 6 22:53:43 Tower kernel: [<c130b8b6>] ? kernel_thread_helper+0x6/0xd Dec 6 22:53:43 Tower kernel: handlers: Dec 6 22:53:43 Tower kernel: [<c1244012>] usb_hcd_irq Dec 6 22:53:43 Tower kernel: Disabling IRQ #16 Dec 6 22:53:51 Tower kernel: usb 2-1.5: USB disconnect, device number 4 then, abotu an hour after that: Dec 6 23:42:03 Tower kernel: irq 17: nobody cared (try booting with the "irqpoll" option) Dec 6 23:42:03 Tower kernel: Pid: 0, comm: swapper Not tainted 3.0.3-unRAID #7 Dec 6 23:42:03 Tower kernel: Call Trace: Dec 6 23:42:03 Tower kernel: [<c104f684>] __report_bad_irq+0x1f/0x95 Dec 6 23:42:03 Tower kernel: [<c104f831>] note_interrupt+0x137/0x1a8 Dec 6 23:42:03 Tower kernel: [<c104e3a6>] handle_irq_event_percpu+0xef/0x100 Dec 6 23:42:03 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 6 23:42:03 Tower kernel: [<c104e3db>] handle_irq_event+0x24/0x3b Dec 6 23:42:03 Tower kernel: [<c104fd53>] ? handle_edge_irq+0xcb/0xcb Dec 6 23:42:03 Tower kernel: [<c104fdbc>] handle_fasteoi_irq+0x69/0x82 Dec 6 23:42:03 Tower kernel: <IRQ> [<c10035c6>] ? do_IRQ+0x37/0x90 Dec 6 23:42:03 Tower kernel: [<c130b8a9>] ? common_interrupt+0x29/0x30 Dec 6 23:42:03 Tower kernel: [<c11dd945>] ? acpi_idle_enter_bm+0x22a/0x25e Dec 6 23:42:03 Tower kernel: [<c127387e>] ? cpuidle_idle_call+0x6b/0xa1 Dec 6 23:42:03 Tower kernel: [<c1001a60>] ? cpu_idle+0x3a/0x52 Dec 6 23:42:03 Tower kernel: [<c12fb388>] ? rest_init+0x58/0x5a Dec 6 23:42:03 Tower kernel: [<c1448717>] ? start_kernel+0x28c/0x291 Dec 6 23:42:03 Tower kernel: [<c14480b0>] ? i386_start_kernel+0xb0/0xb7 Dec 6 23:42:03 Tower kernel: handlers: Dec 6 23:42:03 Tower kernel: [<f8469fba>] skge_intr Dec 6 23:42:03 Tower kernel: Disabling IRQ #17 I had gone to bed, but the only thing that was different, was I enabled SAB/SB, so i had a few more packages running, and it was downloading stuff... prior to that, I copied over about 1TB of stuff during that 1 1/2 days it was up before, and never had any issues... I have since rebooted, re-enabled the OB NIC, but still using the NIC CARD (since the OB NIC isn't supported), and SAB is downloading again... so we'll see... but IRQ17 is my DLINK NIC, IRQ16 is my USB (but that still works, when IRQ17 goes, the server is not network reachable) Any ideas?? Quote Link to comment
TheStapler Posted December 28, 2011 Author Share Posted December 28, 2011 this is still an ongoing issue... and nothing seems to resolve it. I am not sure what more I can do... is it possible that I just have to run the full version of the OS, and install the unraid as an application? I have spent numerous hours on this issue, and I am going insane... it sometimes works fine for days, and then sometimes, it wont stay up for an hour... please help! Quote Link to comment
prostuff1 Posted December 28, 2011 Share Posted December 28, 2011 this is still an ongoing issue... and nothing seems to resolve it. I am not sure what more I can do... is it possible that I just have to run the full version of the OS, and install the unraid as an application? I have spent numerous hours on this issue, and I am going insane... it sometimes works fine for days, and then sometimes, it wont stay up for an hour... please help! I mentioned a few things in my prior post, did you run/do either of those things? What was the outcome? Quote Link to comment
TheStapler Posted December 28, 2011 Author Share Posted December 28, 2011 i haven't done the irqpoll, but i did run memtest, and nothing came up also ran ubuntu-live, and there wasn't any issues at all while it was running. i will try the irqpoll though Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.