LibVirt Failure

[JonathanTN]

I'm running into an issue trying to get VMs to enable.   It tells me libvirt path not found.  I was under the impression that it would auto create that if it is missing?

 

I also noticed on the 27th in the logs there was an error on the disks in i/o but it looks like it cleared.  I may have lost power due to a thunderstorm - unsure if that was the issue.  Would this issue just clear on its own?  

 

Edited May 29 by JonathanTN

[itimpi]

You seem to have corruption on your ‘cache’ pool which is probably why you are having this problem as it has been forced to ‘read-only’.

[JonathanTN]

Is there a recommended solution to fix this and prevent this from happening in the future?

 

[JonathanTN]

I believe I have fixed the issue.  Is there something I can do to avoid this in the future?

[JorgeB]

Diags were removed so can't see what the problem was, though it may not always be clear what caused it.

[JonathanTN]

On 5/30/2024 at 4:18 AM, JorgeB said:

Diags were removed so can't see what the problem was, though it may not always be clear what caused it.

I thought it best to remove since it was just sitting there in the open.  I suspect it was caused from the sudden loss of power.  I have setup backups for it since, so I hope it will not happen again.

 

Thank you both for responding.