bombsngravy Posted May 30 Share Posted May 30 I've been running unraid for a bit now and haven't had any problems that weren't self-induced. Recently though Unraid will slowly start dying ... it usually starts with shares not being accessible outside of unraid and/or with specific dockers (plex for example), it will then become unreachable via IP and unresponsive at the machine. I enabled syslog to get a more complete picture, it appears that one of my nvme's is failing ... but what follows doesn't make much sense to me, in the syslog attached the issues start occurring around 1843 ... at 2148 something happens ... this is when loss to shares/plex occurs and then it slowly dies after I access it at 0100... In the interim, I've disabled the nvme that it calls out in the log ... but don't know if i have other problems. Thanks! bskycc-diagnostics-20240530-0618.zip Quote Link to comment
JorgeB Posted May 30 Share Posted May 30 Pool filesystem is going read only with write time tree block corruption detected This usually means a RAM issue, start by running memtest Quote Link to comment
bombsngravy Posted May 30 Author Share Posted May 30 3 minutes ago, JorgeB said: Pool filesystem is going read only with write time tree block corruption detected This usually means a RAM issue, start by running memtest @JorgeB gotcha, I assume that's only at boot ? I'm currently remote from the system, so it'll be a bit before I can get back to it ... Quote Link to comment
bombsngravy Posted May 30 Author Share Posted May 30 9 hours ago, JorgeB said: Yes, it an option on the boot menu This is where it’s at right now - does it need to go to 100%? Quote Link to comment
Solution JorgeB Posted May 31 Solution Share Posted May 31 Let it complete at least one pass, also note that memtest is only definite if it finds errors, but if it doesn't after a pass you can try recreating the fileystem, or try zfs, if issues persist there could still be an underlying hardware problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.