July 30, 20241 yr Hello guys. I have a MD3220 powervault that i would like to use in my system. Im currently trying it out on a test system. Anyways, It detects in "system devices" but i cant see it when powering upp my R620 server. the onboard HBA is showing (PERC H710 or something) i can mount disck fron the onboard. But i cant use the 9201. It does not show in VMs. have flashed the FW: Quote root@Vault2:/lsi# ./sas2flash -listall LSI Corporation SAS2 Flash Utility Version 10.00.00.00 (2011.05.13) Copyright (c) 2008-2011 LSI Corporation. All rights reserved Adapter Selected is a LSI SAS: SAS2116_1(B1) Num Ctlr FW Ver NVDATA x86-BIOS PCI Addr ---------------------------------------------------------------------------- 0 SAS2116_1(B1) 20.00.07.00 14.01.00.07 07.39.02.00 00:05:00:00 Finished Processing Commands Successfully. Exiting SAS2Flash. But as the logs show, i do not get any errors? When i look at the card itself i see a flashing green LED. So, where to go from here? Any ideas? vault2-syslog-20240730-2229.zip
July 31, 20241 yr 8 hours ago, Rumint said: It does not show in VMs. What do you mean by this? The HBA appears to be correctly detected, but post the complete diagnostics instead.
August 1, 20241 yr Author Here are the diagnostics. I can't see the card in win10 vm, i can't pass it tru either. but it shows in the system devices. im not sure if i have the MD3220 setup right. I hope that the disks will show as the Integrated H710 does. vault2-diagnostics-20240801-2352.zip
August 2, 20241 yr 8 hours ago, Rumint said: I can't see the card in win10 vm It would only show up there if it was being passedthrough. Everything looks normal with the HBA, unless it has a problem with the connections, but most likely it is not the problem,
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.