August 17, 20241 yr There was an error which caused my filesystem to shutdown. Web GUI wasn't available and the dockers were neither. I've made a picture of the error before doing a gracious powerdown -r which is added in the attachments. The error is as follows: XFS (md3p1): metadata I/O error in "xfs_btree_read_buf_block.constprop.0+0x7a/0xc7 [xfs]" at daddr 0x380c2b8d8 len 8 error 5 XFS (md3p1): log I/O error -5 XFS (md3p1): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x19c/0x26f [xfs] (fs/xfs/xfs_trans_buf.c:296). Shutting down filesystem. XFS (md3p1): Please unmount the filesystem and rectify the problem(s) etc.. (please see picture for full error) After the graceful powerdown -r the array seemed to be fine but it was stopped. I did a Check Filesystem Status on disk 3 since that's the one I thought to have a fault. There's also a screenshot of this added as I have very little experience with it. It doesn't seem to tell me how I can repair the problem. Am I in the right place of finding the error or what do I need to do in order to fix this? Any help is welcome and thank you in advance Have a good day ✌️ tower-diagnostics-20240817-1306.zip
August 17, 20241 yr Community Expert Aug 16 02:43:11 Tower kernel: ahci 0000:22:00.0: AHCI controller unavailable! Controller problem, so all connected devices dropped offline.
August 17, 20241 yr Author 43 minutes ago, JorgeB said: Aug 16 02:43:11 Tower kernel: ahci 0000:22:00.0: AHCI controller unavailable! Controller problem, so all connected devices dropped offline. Ah, then I'm guessing it's the pcie extension card for sata connections. Is there any way to fix that or is that a faulty extension card?
August 17, 20241 yr Community Expert Solution Try using it in a different PCIe slot, if the same happens could be a bad controller
August 17, 20241 yr Author Just now, JorgeB said: Try using it in a different PCIe slot, if the same happens could be a bad controller I will do that, thank you for your help! Was my question alright? I know there's a certain layout or so for asking a question in a topic so was wondering if it was okay.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.