oddbear Posted August 20 Share Posted August 20 Hi, I need some help with diagnostics. I am not sure what to look after, as I am quite new to Unraid. Woke up today with two notifications that two of my disks was in error state. The two messages was 3 minutes apart. I am running 'SMART extended self-test' right now, but that might take some time. Diagnostics attach. HW: Minisforum BD790i LSI 9240-8i 6Gbps SAS HBA 4x Seagate HD3.5" SATA3-Raid 22TB SGT ST22000NM001E/ 512e All help appropriated, thanks in advanced. diagnostics-20240820-0746.zip Quote Link to comment
JorgeB Posted August 20 Share Posted August 20 Diags are are rebooting, so we can't see what happened, but SMART looks fine for both, so most likely a power/connection issue. Quote Link to comment
oddbear Posted August 20 Author Share Posted August 20 39 minutes ago, JorgeB said: Diags are are rebooting, so we can't see what happened, but SMART looks fine for both, so most likely a power/connection issue. Thanks. Guess I would need to enable the disks by rebuilding them from parity after the extended smart test is done, if that does not show any issues? And check my power connectors, and just wait to see if this happens again (and then don't reboot before dumping diagnostics)? It's strange that it happened on the same two disks, but I also think both those disks are connected with the same connector from the PSU (a SF750 i think). Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.