September 27, 20241 yr I recently moved everything to a new pc. One drive in a group of four, that is part of a zfs pool, had to be replaced. All seemed to be going well with the resilvering process, which said it had been completed with no errors. After rebooting the system the array will no longer start up, stating "wrong pool state" and saying that the newly resilvered disk "invalid config". Still learning here, and hoping someone can point me in the right direction.
September 27, 20241 yr Author pool: turtle id: 15126543166928975714 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: turtle ONLINE mirror-0 ONLINE sdg1 ONLINE sdd1 ONLINE mirror-1 ONLINE sde1 ONLINE sdf1 ONLINE
September 27, 20241 yr Community Expert Solution Stop array unassign all pool devices start array stop array re-assign all the pool devices in the same order as the zpool output: sdg sdd sde sdf start array and pool should import.
September 27, 20241 yr Author Forgive my apprehension, but just want to double check. The array is currently not running and when I select "no device" for all the drives in the zpool it says I will need to check the box to start the array with missing cache disks in order to restart. Will this not cause me to lose the zpool entirely?
September 27, 20241 yr Community Expert 4 minutes ago, turtleship said: and when I select "no device" for all the drives in the zpool it says I will need to check the box to start the array with missing cache disks in order to restart. Check that box, it won't touch the pool as long as all devices are unassigned.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.