December 4, 20241 yr I had two drives fall offline recently. Disk 1 is showing up after a reboot, disk two must be rebuilt (which I'm doing now) disk 1 extended smart test showed no errors. I had one spare sata cable and replaced the for for disk 1 just in case that was the issue, I'm going to replace the one for disk 2 ASAP. just seeing if anyone has any insight. Thanks in advance! syslog-192.168.86.135.log
December 4, 20241 yr Author I have restarted to install new sata cables. So I don't know if what you need is in there. plex-diagnostics-20241204-1208.zip
December 4, 20241 yr Community Expert Emulated disk2 is not mounting, before rebuilding check filesystem, run it without -n
December 4, 20241 yr Author xfs_repair status: Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ERROR: The filesystem has valuable metadata changes in a log which needs to be replayed. Mount the filesystem to replay the log, and unmount it before re-running xfs_repair. If you are unable to mount the filesystem, then use the -L option to destroy the log and attempt a repair. Note that destroying the log may cause corruption -- please attempt a mount of the filesystem before doing this.
December 4, 20241 yr Author Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... ALERT: The filesystem has valuable metadata changes in a log which is being destroyed because the -L option was used. - scan filesystem freespace and inode maps... clearing needsrepair flag and regenerating metadata sb_fdblocks 664250044, counted 653904990 - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - agno = 6 - agno = 7 - agno = 8 - agno = 9 - agno = 10 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 1 - agno = 4 - agno = 3 - agno = 7 - agno = 6 - agno = 2 - agno = 5 - agno = 8 - agno = 9 - agno = 10 clearing reflink flag on inodes when possible Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... - traversal finished ... - moving disconnected inodes to lost+found ... Phase 7 - verify and correct link counts... Maximum metadata LSN (5:3967141) is ahead of log (1:2). Format log to cycle 8. done
December 5, 20241 yr Community Expert Should be resolved, see if it mounts now and contents look correct.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.