Hi All,

 

Am at my wits end, run a server in UK (Live in Dubai) and it keeps crashing

I have a 45 Drives Case , with Asus PRO WS W680 Motherboard , i9 14900KF , 64 GB Corsair Veng 7000, Nvidia RTX 4060 and an RM1000x power supply.

I was having these issues before so these components apart from the Graphics card are all new. 

I have completely reset everything done Memtest , wiped my entire config started again, added hard drives one at a time without the graphics card and no matter what I do get errors which freeze the System so it is unusable.

Could I be that unlucky that the new CPU is faulty as well ? have attached my logs and would appreciate any help.

I have had pretty much every error u can imagine.

 

I have upgraded the Bios on Motherboard and tried almost every setting for Power etc within Bios as have read loads of posts.

 

I have a piKVM attached and happy to buy anybody a beer that has ideas of how to sort thisI

nostromo-syslog-20241224-1012.zip

Unraid driver is crashing, this is almost always a hardware issue, if you have multiple sticks try using the server with just one, if the same try with a different one, that will basically rule out bad RAM.

1 hour ago, jonbigtelly said:

Hi All,

 

Am at my wits end, run a server in UK (Live in Dubai) and it keeps crashing

I have a 45 Drives Case , with Asus PRO WS W680 Motherboard , i9 14900KF , 64 GB Corsair Veng 7000, Nvidia RTX 4060 and an RM1000x power supply.

I was having these issues before so these components apart from the Graphics card are all new. 

I have completely reset everything done Memtest , wiped my entire config started again, added hard drives one at a time without the graphics card and no matter what I do get errors which freeze the System so it is unusable.

Could I be that unlucky that the new CPU is faulty as well ? have attached my logs and would appreciate any help.

I have had pretty much every error u can imagine.

 

I have upgraded the Bios on Motherboard and tried almost every setting for Power etc within Bios as have read loads of posts.

 

I have a piKVM attached and happy to buy anybody a beer that has ideas of how to sort thisI

nostromo-syslog-20241224-1012.zip 29.72 kB · 1 download

34 minutes ago, JorgeB said:

Unraid driver is crashing, this is almost always a hardware issue, if you have multiple sticks try using the server with just one, if the same try with a different one, that will basically rule out bad RAM.

 

@JorgeB I will try that but bought new Ram and that did not cure the issue. Will try this afternoon and post back 

@JorgeB Tried with 2 Single sticks of memory and get these errors, any more ideas mate before I just give up

nostromo-syslog-20241224-1341.zip

Still same crashes, you could try v6.12 since there have been a few cases where they appear to be caused by some kernel incompatibility with the hardware, if the Unraid driver continues to crash with that kernel, it's almost certainly hardware, and if it's not the RAM, the CPU would be then next suspect.

@JorgeB What are the chances that it is 2 x CPU failures ? Will try rolling back then decide what to do next. Regards Jon

@JorgeB Did as u suggested rolled back, reformatted USB and same issues. U reckon it could be that I have had 2 x CPU with same issue ?

They are mounted to completely different motherboards.

 

attached logs from latest build does keep saying likely CPU 8 (core 16 socket 0) but I have started in Bios with only 4 cores just faults with different number.

 

Appreciate all the help mate really do.

nostromo-syslog-20241224-1655.zip

nostromo-syslog-20241224-1655.zip

Edited December 24, 20241 yr by jonbigtelly
added info

2 minutes ago, jonbigtelly said:

I have had 2 x CPU with same issue

Unlikely but not impossible, could also be a different hardware problem, but the Unraid driver crashing with both very different kernels, basically confirms that is a hardware related issue.

@JorgeB bearing in mind I have a 1700 motherboard what CPU would u recommend ? Am just going to buy another one and hope that is the problem.

Difficult for me to say, since I don't know how powerful a CPU you need, I do believe that the higher end K models are the ones most prone to have the 13/14th gen stability issues.

12900 is a rock solid CPU but runs warm. 

Hi @JorgeB @Veah bought a 12900 and installed it today. Not been running long but not a single error. Just shows u replacement parts can be dud as well ! Gonna RMA the 14900 and poo the old one in a PC in case that is not as picky as Unraid. Thx for all the help