Hi everyone,

 

Fix Common Problems says, that I have Multiple NICs on the same IPv4 network. The Suggested Fix column says: eth2 and eth3 both have IP addresses on the 10.0.0.0 network. This is rarely a valid configuration.

 

I checked my network settings but I can't figure out, where this error comes from. I have 2 onboard Nics and one PCI-e 10GbE Card installed. Eth0 is connected to my 1 GbE Network and has the IP 192.168.1.115. Eth1 is down and not configured because I don't need it. Eth2 is connected to my 10GbE Network with the IP 10.0.0.115. I don't see eth3 in my network settings.

 

Can anybody help me solve this problem?

unraid-01-diagnostics-20250123-1747.zip

Edit /config/network.cfg and remove this section:

 

IFNAME[3]="br3"
BRNAME[3]="br3"
BRNICS[3]="eth3"
BRSTP[3]="no"
BRFD[3]="0"
DESCRIPTION[3]="10 GbE UNRAID"
PROTOCOL[3]="ipv4"
USE_DHCP[3]="no"
IPADDR[3]="10.0.0.115"
NETMASK[3]="255.XXX.XXX.0"

 

Basically, everything that has a [3], also change SYSNICS="4" to "3" and then reboot.

Thank you very much, that worked perfectly!