February 11, 20251 yr Community Expert I flashed my two HBAs (LSI2008s) successfully (or so I think). I have 8 array HDDs attached to one of the HBAs and 8 SSDs as part of a raid-z1 pool attached to the other. When I brought my server back online, all of the array HDD drives were there, but the 8 SSDs were listed as unassigned and my z-pool ("Cache") is waiting to be assigned drives. I didn't want to do anything before checking in here. Both HBAs and all the drives are recognized on boot. diags.zip
February 11, 20251 yr Author Community Expert pool: cache id: 3975473903692486089 state: ONLINE status: Some supported features are not enabled on the pool. (Note that they may be intentionally disabled if the 'compatibility' property is set.) action: The pool can be imported using its name or numeric identifier, though some features will not be available without an explicit 'zpool upgrade'. config: cache ONLINE raidz1-0 ONLINE sdv1 ONLINE sdu1 ONLINE sdt1 ONLINE sds1 ONLINE sdo1 ONLINE sdr1 ONLINE sdq1 ONLINE sdp1 ONLINE
February 12, 20251 yr Community Expert Solution You should be able to just reimport the pool: on main click on the first device for that pool and then "remove pool" back on main, create a new pool with the same name and number of slots assign the pool device(s), leave the filesystem set to auto start the array to import the pool
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.