Unraid is working fine, however I left to go out of town last week and now I have noticed that the array devices shown on the main tab are slow to populate. I thought perhaps my USB boot drive was having issues, so I swapped over to a new one, but the problem persists. It is taking 30+ seconds to populate this data. Array is working none the less but this is annoying and new. 

 

Edited April 26, 20251 yr by Hamrdeye

Try booting in safe mode and/or using a different browser

I will try that tomorrow. Hopefully not a browser issue as I don’t want to use a different browser

Found the issue and have validated it is repeatable. The offending plug in is UnRaid Connect. With it installed the issue return. 

 

UPDATE : 

 

Apparerntly the issue was I needed to register my server again and sign in. Did that and all seems well now. Not sure why I had to do that again. 

Edited April 27, 20251 yr by Hamrdeye

Thanks. Yeah, its unraid connect. I tried logging out - in but that did not work. I had to remove it and all is well now.

With that said I have 2 unraid servers, 1 is working fine with Connect (both are 7.0.1) 

I, too, have 2 servers and have this issue. If I uninstall Unraid Connnect the issue goes away. If I reinstall Unraid Connect and log in, the problem appears to be fixed. It isn't fixed, it just moves to the other server. Then if I uninstall/reinstall Unraid Connect on this server, the issue is on both servers. It takes 20 to 25 seconds for the Array Devices info to finally display. This was not an issue when both were running 7.0.0 (both servers are now on 7.1.2).

I don't know what that is. I only have the one server, so the issue went away for me. It returned again on the most recent UnRaid OS update. But uninstalling and reinstalling fixed it again.