April 25Apr 25 Hey!,Anyone knows how to move/transfer the existing UNRAID 7.3.xx from an old NVME/SSD to a new one ? The Unraid Key is still on the USB. I don't transferred to the TPM (yet)Thx
April 25Apr 25 Community Expert Solution Mount the flash drive, e.g.:mkdir /xmount /dev/sdX1 /xCopy only the current config there (/boot/config to /x/config) , assuming the Unraid version is already the same, boot from the flash drive, remove the current boot pool, run the wizard to create the new boot pool, boot from the new boot pool.
May 2May 2 On 4/25/2026 at 7:34 AM, JorgeB said:Mount the flash drive, e.g.:mkdir /xmount /dev/sdX1 /xCopy only the current config there (/boot/config to /x/config) , assuming the Unraid version is already the same, boot from the flash drive, remove the current boot pool, run the wizard to create the new boot pool, boot from the new boot pool.Could you explain that further? I don't currently have a flash drive boot, only internal boot. So I need to create a new flash drive for boot, and then use the wizard to get up the new drive?
May 3May 3 Community Expert 16 hours ago, clayton.g.finley said:So I need to create a new flash drive for boot, and then use the wizard to get up the new drive?That's the easiest way currently: create a flash drive using the USB tool with the same version you are running from internal boot, copy the config folder there, boot from the flash drive, and re-run the wizard to create the new boot pool.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.