May 19May 19 Author The main folder is named 2018 and contains 195GB of data, which appears to be good. There is a lost+found folder with 1170 files. He said if that's all he lost, he'd be just fine with it. But obviously if we can get it back, that would be great. If not, I'd just like to learn how to rebuild the disk and get it working again.Thank you!
May 20May 20 Author Can I just swap in a new drive in the disk 2 slot and will it rebuild the data now that it seems to be emulating correctly?
May 21May 21 Author I replaced the disk and it did the rebuild, but it looks like there might be some issues with the Parity drive. It's showing 230,000+ errors. I have an 8TB drive that I can swap in it's place, which is something I wanted to do anyway. How do I resolve the issue with the parity drive? There were a ton of these errors, but I ran the short SMART test (attached) on the drive and it said it was fine.20-05-2026 19:53Unraid Parity disk SMART health [197]Warning [TOWER2] - current pending sector is 122WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ (sde)warning20-05-2026 19:53Unraid Parity disk SMART health [1]Warning [TOWER2] - raw read error rate (failing now) is 6572WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ (sde)warningThank you! WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ-20260521-0811.txt tower2-diagnostics-20260521-0819.zip
May 21May 21 Community Expert You should add attributes 1, 200 for monitoring on each of your WD disks.Do an extended SMART self-test on parity.
May 22May 22 Author @trurl Here is what I got.Last SMART test result:Completed: read failureWDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ-20260522-0937.txt# 1 Extended offline Completed: read failure 30% 35746 3477753040 # 2 Extended offline Completed: read failure 90% 35738 3547641224
May 27May 27 Author I think I'm all set. I replaced the parity disk and the parity check shows as completed with 0 errors.Thank you so much @trurl and @JorgeB ! I'm going to try and tackle the upgrade to 7.3.0 now and see how that goes. Fingers crossed!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.