Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Invalid Configuration

Featured Replies

  • Author

The main folder is named 2018 and contains 195GB of data, which appears to be good. There is a lost+found folder with 1170 files. He said if that's all he lost, he'd be just fine with it. But obviously if we can get it back, that would be great. If not, I'd just like to learn how to rebuild the disk and get it working again.

Thank you!

  • Author

Can I just swap in a new drive in the disk 2 slot and will it rebuild the data now that it seems to be emulating correctly?

  • Community Expert

Yes, that should work.

  • Author

I replaced the disk and it did the rebuild, but it looks like there might be some issues with the Parity drive. It's showing 230,000+ errors. I have an 8TB drive that I can swap in it's place, which is something I wanted to do anyway.

How do I resolve the issue with the parity drive? There were a ton of these errors, but I ran the short SMART test (attached) on the drive and it said it was fine.

20-05-2026 19:53

Unraid Parity disk SMART health [197]

Warning [TOWER2] - current pending sector is 122

WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ (sde)

warning

20-05-2026 19:53

Unraid Parity disk SMART health [1]

Warning [TOWER2] - raw read error rate (failing now) is 6572

WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ (sde)

warning

Thank you!

Parity Errors.jpg

WDC_WD60EFRX-68L0BN1_WD-WX11D37444PZ-20260521-0811.txt tower2-diagnostics-20260521-0819.zip

  • Community Expert

You should add attributes 1, 200 for monitoring on each of your WD disks.

Do an extended SMART self-test on parity.

  • Community Expert
3 minutes ago, Spyderturbo007 said:

Completed: read failure

replace

  • Author

I think I'm all set. I replaced the parity disk and the parity check shows as completed with 0 errors.


Thank you so much @trurl and @JorgeB ! I'm going to try and tackle the upgrade to 7.3.0 now and see how that goes. Fingers crossed!

Parity Check Complete.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.