June 22Jun 22 So I updated Unraid 7.0.0 to 7.3.1 and now all the drives are missing in the Array.Been on 7.0 basically since it came out and many version prior without running into this. but I'm currently stumped. The drives just show as missing with no drives available to add.If I downgrade everything is fine. I assume its a resource conflict or driver error or something like that.The suggestion in this post was the only real info I could find so I tried adding the info to the config but didnt seem to help.Thank you kindly for anyone who might be able to help out.Attached a diagnosis log and screenshotEDIT: I updated the BIOS on the Supermicro X11 and it seems to have fixed the issue at hand. I am not sure if it was the update specifically or the CMOS reset I did afterwards changing something that did it. But after updating BIOS and CMOS reset after all is good.I hope this helps anyone else who may run into this issue.towerx2-diagnostics-20260622-1515.zip Edited June 22Jun 22 by Liquidbings Fixed the issue wanted to update
June 23Jun 23 Community Expert Jun 22 15:05:05 Towerx2 kernel: mpt3sas_cm0: diag reset: FAILEDJun 22 15:05:05 Towerx2 kernel: mpt3sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:12349/_scsih_probe()!HBA was failing to initialize; the BIOS update may have helped with that
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.