October 12Oct 12 I was attempting to boot my 7.3.1 server after a normal system shutdown and encountered the following error...mount: /dev/sdg1 mounted on /boot.bootingrc.S: Verifying boot/bzimage checksum ...rc.S: Verifying boot/bzroot checksum ...rc.S: Verifying boot/bzfirmware checksum ...rc.S: Verifying boot/bzmodules checksum ...unmount: /dev: target is busy.bzmodules checksum error - press ENTER key to reboot...Looking at the syslog, I noted that during the preceding shutdown there was a problem unmounting /mnt/cache, resulting in multiple retries, which I'm assuming was the reason for the subsequent boot fail...Oct 11 10:39:21 BERRY-UNRAID emhttpd: Retry unmounting disk share(s)...Oct 11 10:39:26 BERRY-UNRAID emhttpd: Unmounting disks...Oct 11 10:39:26 BERRY-UNRAID emhttpd: shcmd (165): umount /mnt/cacheOct 11 10:39:26 BERRY-UNRAID root: umount: /mnt/cache: target is busy.Oct 11 10:39:26 BERRY-UNRAID emhttpd: shcmd (165): exit status: 32Diagnostics zip file attached.Any insight you all might lend in to the reason for the unmount failure and how to get past this boot error would be much appreciated. Thanks in advance!--Bill berry-unraid-diagnostics-20261011-1039.zip
October 12Oct 12 Author 5 minutes ago, trurl said:Do you have a command line open on cache?I do not. How would I do that?
October 12Oct 12 Solution As a first step, try recreating the flash drive, first backup the current one, then recreate it using the USB tool, confirm the flash drive boots with the stock install, and if yes, restore only the /config folder from the backup overwriting any existing files.
October 12Oct 12 Author Does the recreation need to be on the original physical flash drive to preserve licensing..? Can the current contents of that flash drive simply be copied to my laptop hard drive as backup..? Please forgive these silly questions - I've only been with UNRAID a few months now and this is my first "recovery" situation...
October 12Oct 12 To preserve the license, you would need to use the same flash drive, unless the server is using TPM for licensing, but you could use a different one and transfer it. And yes, for a backup, just copy all the files.
October 12Oct 12 Author That did the trick - it booted successfully and everything looks normal. I did lose parity, but I kind of expected that... and that's ok because I was in the process of preclearing a new drive for parity when this occurred anyway, so I cancelled the check and I'll fire off another one as soon as I replace that drive...Thanks so much for the help!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.