Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (â‹®) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to do under UnRAID a system test for a new machine?

Featured Replies

I have just successfully setup UnRAID on my brand new UGREEN NAS. 😃

I would like to check that the new hardware works ok. Is theer under UnRAID atest program availble taht check RAM, CPU, system clock, etc?

Many thanks for any pointers!

Unraid has one built-in hardware test. For the rest, use the normal disk tools and the logs:

RAM: Reboot, and on the Unraid boot menu select Memtest86+. Let it run for at least a few full passes. Overnight is better. Any error means a problem, usually a RAM module, but sometimes the RAM speed or the board. Note that a clean pass does not completely prove the RAM is good, but it does catch most bad modules.

CPU: Unraid does not include a CPU stress test. You can run a stress test container from Community Applications for a few hours, or boot a live Linux USB with a stress tool. Watch the CPU temperatures while it runs. On a compact NAS, cooling is often the weak point.

Disks: Before you add data:

- Run a SMART extended self-test on each disk (click the disk on the Main page, then Self-Test). It takes several hours on large disks.

- Let the first parity sync complete, then run a full parity check. This reads every disk end to end and also tests the controller and cables. A correct parity check should finish

with 0 errors.

After the tests: Go to Tools > System Log and look for machine check (MCE), ATA/disk, or PCIe errors. The Fix Common Problems plugin also reports MCE errors. For the system clock, set NTP servers in Settings > Date and Time. If the time is correct after a few days, the clock is fine.

If any test reports errors, post your diagnostics (Tools > Diagnostics) and we can take a look.

  • Author

Thanks @JorgeB.

I'm doing the MemTest right now.

Might do stress-ng from a Linux USB afterwards.

Then the smartctl as I add discs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.