Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

halloleo

Members
  1. Another question about the Preclear operation: Can I run the normal script for two disks at the same time? Or do I need the docker setup for it?
  2. Thanks. Thanks. Good to know. Will do “Clear Disk”. I was asking because Clear Disk’s description “The disk is cleared and the Unraid signature is written to the disk. This will create an empty partition on the disk.“ didn’t reveal clearly to me that it tests the disk…
  3. I do not understand which of these options does the test-and-clear operation which gives users "a sense of confidence with pre-testing their disks"?
  4. Thanks for this. Reading through the first posts right now. Very helpful. I was aware of the idea of Support Threads and also scared of them because they have sooo many (for me as a newby) unrelated replies. But I now I can see: The first post is always somewhat the doco of the plugin. 🙃
  5. So, I can add slots (and with that hard drives) after I use a smaller set up for a while? Or should set the number of slots to the number of bays in my NAS?
  6. I have decided to Preclear the hard drives before putting them in an array. So I installed the Unassigned Devices and the Unassigned Devices Preclear plugins. In Unassigned Devices Preclear I only get the message "There are no disks that can be precleared. - A disk must be cleared of all partitions before it can be precleared. You can use Unassigned Devices to clear the disk" Then I looked in Unassigned Devices: Here I see only that I can mount the drives but no way to clear them. (See attached screenshot.)
  7. I try to create my first (test) array. 😃 (See attached.) If I want a 1-parity array, do I just leave the "Parity 2" slot unassigned? Also, If I want my array to consist of 3 disks (1 parity +2 data), I need to choose 4 slots (in order to leave one slot unassigned for Parity 2, right? Finally, what is the slot setting for in any case? Why should I set the number of slots higher than hard drives I have? (And that number can the system detect...) Many thanks for any help - and your patience with me!
  8. Thanks for your detailed response! To the idea of multiple user shares: Can they write to the same disks? E.g. let’s say, I have a DMG user share with 800GB limit and it has filled up a disk A to a left over of 500GB. Can another “normal” user share with a 50GB limit still continue to fill up this physical disk A? When a copy fails, can I “just try again” and it might work because Unraid chooses another disk? Also, is there maybe a “compactor” service/plugin available which (overnight?) reorganises the files on the various disks to have at the end one disk with the most free space? Does this make any sense?
  9. I am setting up Unraid with 8 older smaller drives (2,3 & 4TB HDDs) and I am confused about the Minimum Free Space setting. 1. Some of the files I want to store are "cold" historic archives of complete bootable macOS machines. These are DMG files around normally 300GB to 700 GB in size. (One or two are up to 1.5TB.) When I go with the recommendation in the doco to "set this value to twice the size of your largest file", I have to set it to 3TB - which sounds absurd. 2. Also what does this setting mean for smaller files? Let's say I set it to ("only") 500GB. When I have filled up a 2 TB drive to 1.8TB, does Unraid still squeezes all the many small files I have (photos, etc) in the left over space? Thanks for any clarifications!
  10. I setup Unraid with some older smaller drives (2,3 & 4TB HDDs), before using them in my Unraid, I want to check the drives. Is running the long self test (smartctl -t long) enough? Or is there a plugin recommended which does more thorough tests? Thanks for any advice!
  11. Now I can! Very strangely and a day later it works now. 😄 Thanks for the great plugin!
  12. I realised the basic question about best practice ("What people do") is more something for reddit than for here. - So I asked the same thing on reddit: https://www.reddit.com/r/unRAID/comments/1xt2ec1/in_which_bay_should_i_put_which_drive/
  13. For each I do a long SMART self-test via Unraid's GUI. Sufficient?
  14. Cool. But is there some common practice?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.