Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Unable to enumerate USB error after upgrading from 7.3.5 to 7.4.0

Featured Replies

as above - I updated to 7.4.0, system boots to unraid boot menu - goes through a good part of the bootup process - then throws some usb errors and stops at "unable to enumerate usb".
I tried powering off and moving usb to a different usb slot (tried usb 2 and usb 3), unplugged all other usb devices...still no luck.

Any thoughts???

TIA....

To see what is going on, please post a photo of the screen where the boot stops, showing the last lines and the USB errors before them. Please also let us know the make, model and size of the flash drive.

Meanwhile, you should be able to go back to 7.3.5. Shut down the server and plug the flash drive into another computer. Copy all the files from the "previous" folder on the flash drive to the root of the flash drive, replacing the existing files with the same names. Then put it back in the server, using the same port as before, and boot. Please let us know if 7.3.5 boots normally again from the same stick and port. If it does, please post the diagnostics from that boot (Tools > Diagnostics).

If you have a different flash drive, preferably a different model, you could also use the USB Creator to make a stock 7.4.0 install on it, with no config, and see if it boots past that point in the same port. This test should help tell whether the problem is with the flash drive or with 7.4.0 on this hardware.

  • Author

I copied the bz*.* and previous files to the root of the USB - put it back into the normal usb slot - got the same enumeration error. reset the NAS and moved the usb to a different slot - and it booted. Here is the info from the diagnostics.

Thanks for the help - greatly appreciated.

tower-diagnostics-20261120-1342.zip

The diagnostics confirm you’re back on 7.3.5, and I don’t see USB errors in this successful boot.

Since you also saw the error after restoring the previous files, we can’t yet say whether it’s specific to 7.4.0.

For now, keep the flash in the working port and make a boot-device backup saving it to another computer.

If you retry 7.4.0, use that same port. If it fails again, photograph the screen showing the USB errors and the final boot message.

  • Author

ok - thanks - will give it a try

  • Author

Well - I tried a minor upgrade from 7.3.5 to 7.3.6 - and it ended up with the same error.

I have not touched the USB yet - so it is in the same slot.

I did make a backup before I started.

Here is a shot of where it stops - - thanks.

20261121_090823.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.