Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

7.4.1: Navigating from Dashboard to Main spins up all array disks (parity + data) without any disk I/O

Featured Replies

Version: Unraid 7.4.1 (reproduced on three separate servers)

Summary

With all array disks in standby, switching in the WebGUI from the Dashboard tab to the Main tab spins up every array disk, including parity. This happens on all three of my servers running 7.4.1. As far as I remember, the disks stayed asleep while browsing the WebGUI before 7.4.0/7.4.1 (I cannot say for sure which release introduced it).

Steps to reproduce

  1. Let all array disks spin down (or spin them down manually).

  2. Open the WebGUI on the Dashboard page (disks stay in standby).

  3. Click through to the Main tab.

  4. All array disks, parity included, spin up.


What the logs show (server 1, 2026-11-22)

All five array disks come up in the same second, followed immediately by emhttpd reading SMART from each of them:

Nov 22 14:22:16 kernel: ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Nov 22 14:22:16 kernel: ata12.00: configured for UDMA/133
Nov 22 14:22:16 emhttpd: read SMART /dev/sdh
Nov 22 14:22:16 emhttpd: read SMART /dev/sdg
Nov 22 14:22:16 emhttpd: read SMART /dev/sdb
Nov 22 14:22:16 emhttpd: read SMART /dev/sdf
Nov 22 14:22:16 emhttpd: read SMART /dev/sdi

The md driver counters (mdcmd status, rdevReads/rdevWrites) did not change for any disk in that interval (parity +0, disk1 +0, disk2 +0, disk3 +0, disk4 +0). So this is not caused by reads or writes from a container, VM, share or plugin. The disks receive a spin-up command at the ATA level, all at once, while the Main page loads.

The same pattern appeared earlier that day at 10:10:16 (emhttpd: read SMART on sdf/sdg/sdh), when I was also working in the WebGUI.

What I ruled out

  • No ZFS plugins installed; the array disks are formatted with btrfs.

  • Docker containers and VMs only use SSD pools (the shares they touch are cache-only), and the md counters stay at zero during the event.

  • Unassigned Devices, Dynamix plugins and Preclear contain no SMART/hdparm calls that target array disks.

  • The effect is identical on three different servers, so it does not look hardware or plugin specific.


Expected behavior

Loading the Main tab should not spin up disks that are in standby (the 7.3.0 release notes mention fixing WebGUI/API requests that needlessly spun up the whole HDD array).

Additional info

  • Disk settings: spin down delay 30 min, spinup groups off, SMART polling (poll_attributes) 60.

  • I can provide diagnostics (anonymized) from any of the three servers on request.

Yep. Same on my servers after installing 7.4.1. Dashboard to Main in GUI spins up all drives not already active.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.