jbaruffa Posted October 12, 2013 Share Posted October 12, 2013 I recently built a new server and have three Supermicro CSE-M35T-1B drive cages and two Supermicro AOC-SASLP-MV8 cards. The issue seems to be with one drive in one slot, no matter what I do. I've gotten the same error with different drives and changed out cables. The only thing I haven't swapped out is the SAS card. No matter what I do, /dev/md7 will not format. I have run a preclear on all drives before trying to format, however, I get the following when I try: Oct 12 12:34:01 ZEUS emhttp: shcmd (267): set -o pipefail ; mkreiserfs -q /dev/md7 |& logger Oct 12 12:34:01 ZEUS logger: mkreiserfs 3.6.21 (2009 www.namesys.com) Oct 12 12:34:01 ZEUS logger: Oct 12 12:34:01 ZEUS logger: Oct 12 12:34:01 ZEUS logger: The problem has occurred looks like a hardware problem. If you have Oct 12 12:34:01 ZEUS logger: bad blocks, we advise you to get a new hard drive, because once you Oct 12 12:34:01 ZEUS logger: get one bad block that the disk drive internals cannot hide from Oct 12 12:34:01 ZEUS logger: your sight,the chances of getting more are generally said to become Oct 12 12:34:01 ZEUS logger: much higher (precise statistics are unknown to us), and this disk Oct 12 12:34:01 ZEUS logger: drive is probably not expensive enough for you to you to risk your Oct 12 12:34:01 ZEUS logger: time and data on it. If you don't want to follow that follow that Oct 12 12:34:01 ZEUS logger: advice then if you have just a few bad blocks, try writing to the Oct 12 12:34:01 ZEUS logger: bad blocks and see if the drive remaps the bad blocks (that means Oct 12 12:34:01 ZEUS logger: it takes a block it has in reserve and allocates it for use for Oct 12 12:34:01 ZEUS logger: of that block number). If it cannot remap the block, use badblock Oct 12 12:34:01 ZEUS logger: option (-B) with reiserfs utils to handle this block correctly. Oct 12 12:34:01 ZEUS kernel: quiet_error: 23 callbacks suppressed Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 0 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 1 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 2 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 3 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 4 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 5 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 6 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 7 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 8 Oct 12 12:34:01 ZEUS kernel: Buffer I/O error on device md7, logical block 9 Oct 12 12:34:01 ZEUS logger: Oct 12 12:34:01 ZEUS logger: bread: Cannot read the block (0): (Input/output error). Oct 12 12:34:01 ZEUS logger: Oct 12 12:34:02 ZEUS emhttp: _shcmd: shcmd (267): exit status: -122 Oct 12 12:34:02 ZEUS emhttp: shcmd (268): :>/etc/samba/smb-shares.conf Oct 12 12:34:02 ZEUS emhttp: shcmd (269): cp /etc/netatalk/AppleVolumes.default- /etc/netatalk/AppleVolumes.default Oct 12 12:34:02 ZEUS emhttp: Restart SMB... Oct 12 12:34:02 ZEUS emhttp: shcmd (270): killall -HUP smbd Oct 12 12:34:02 ZEUS emhttp: shcmd (271): ps axc | grep -q rpc.mountd Oct 12 12:34:02 ZEUS emhttp: _shcmd: shcmd (271): exit status: 1 Oct 12 12:34:02 ZEUS emhttp: Restart AFP... Oct 12 12:34:02 ZEUS emhttp: shcmd (272): killall -HUP afpd Oct 12 12:34:02 ZEUS emhttp: shcmd (273): /usr/local/sbin/emhttp_event svcs_restarted Oct 12 12:34:02 ZEUS emhttp_event: svcs_restarted Any ideas? Quote Link to comment
garycase Posted October 12, 2013 Share Posted October 12, 2013 If the issue's always with drives in the same slot, then clearly you have either a bad slot in the cage or a bad port on the controller. You've tried swapping cables -- now try connecting a different port to that slot. If it works, you have a bad slot on your controller; if not, the slot is bad -- RMA the cage. Quote Link to comment
dgaschk Posted October 13, 2013 Share Posted October 13, 2013 Attach a SMART report. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.