Romir Posted March 26, 2009 Share Posted March 26, 2009 Gigabyte GA-MA780G-UD3H AM2+, AMD 5050e, 2x Corsair 2GB, 4x 1TB WD10EADS, IDE Sata mode The chipset, southbridge, and realtek nic are all supported so the parity creation and check finished as expected. There was a SB700 "hiccup" that I don't understand though. (Edit: I saw Tom's post on the SB700 error messages but this has more preceding that error.) Mar 25 22:08:50 Unraid kernel: ata4.00: exception Emask 0x50 SAct 0x17 SErr 0x280900 action 0x6 frozen Mar 25 22:08:50 Unraid kernel: ata4.00: irq_stat 0x08000000, interface fatal error Mar 25 22:08:50 Unraid kernel: ata4: SError: { UnrecovData HostInt 10B8B BadCRC } Mar 25 22:08:50 Unraid kernel: ata4.00: cmd 60/28:00:87:c3:08/01:00:39:00:00/40 tag 0 ncq 151552 in Mar 25 22:08:50 Unraid kernel: res 40/00:24:97:c5:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata4.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata4.00: cmd 60/a8:08:af:c4:08/00:00:39:00:00/40 tag 1 ncq 86016 in Mar 25 22:08:50 Unraid kernel: res 40/00:24:97:c5:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata4.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata4.00: cmd 60/40:10:57:c5:08/00:00:39:00:00/40 tag 2 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:24:97:c5:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata4.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata4.00: cmd 60/f8:20:97:c5:08/01:00:39:00:00/40 tag 4 ncq 258048 in Mar 25 22:08:50 Unraid kernel: res 40/00:24:97:c5:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata4.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata4: hard resetting link Mar 25 22:08:50 Unraid kernel: ata1.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen Mar 25 22:08:50 Unraid kernel: ata1.00: irq_stat 0x08000000, interface fatal error Mar 25 22:08:50 Unraid kernel: ata1: SError: { UnrecovData HostInt 10B8B BadCRC } Mar 25 22:08:50 Unraid kernel: ata1.00: cmd 60/00:00:87:c3:08/04:00:39:00:00/40 tag 0 ncq 524288 in Mar 25 22:08:50 Unraid kernel: res 40/00:0c:87:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata1.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata1.00: cmd 60/08:08:87:c7:08/00:00:39:00:00/40 tag 1 ncq 4096 in Mar 25 22:08:50 Unraid kernel: res 40/00:0c:87:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata1.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata1: hard resetting link Mar 25 22:08:50 Unraid kernel: ata2.00: exception Emask 0x50 SAct 0x3 SErr 0x280900 action 0x6 frozen Mar 25 22:08:50 Unraid kernel: ata2.00: irq_stat 0x08000000, interface fatal error Mar 25 22:08:50 Unraid kernel: ata2: SError: { UnrecovData HostInt 10B8B BadCRC } Mar 25 22:08:50 Unraid kernel: ata2.00: cmd 60/00:00:87:c3:08/04:00:39:00:00/40 tag 0 ncq 524288 in Mar 25 22:08:50 Unraid kernel: res 40/00:0c:87:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata2.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata2.00: cmd 60/08:08:87:c7:08/00:00:39:00:00/40 tag 1 ncq 4096 in Mar 25 22:08:50 Unraid kernel: res 40/00:0c:87:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata2.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata2: hard resetting link Mar 25 22:08:50 Unraid kernel: ata3.00: exception Emask 0x50 SAct 0x7fffffff SErr 0x280900 action 0x6 frozen Mar 25 22:08:50 Unraid kernel: ata3.00: irq_stat 0x08000000, interface fatal error Mar 25 22:08:50 Unraid kernel: ata3: SError: { UnrecovData HostInt 10B8B BadCRC } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/50:00:87:c3:08/00:00:39:00:00/40 tag 0 ncq 40960 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/38:08:e7:bf:08/00:00:39:00:00/40 tag 1 ncq 28672 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/60:10:1f:c0:08/00:00:39:00:00/40 tag 2 ncq 49152 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/50:18:97:c5:08/00:00:39:00:00/40 tag 3 ncq 40960 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/28:20:37:c1:08/00:00:39:00:00/40 tag 4 ncq 20480 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/28:28:9f:c1:08/00:00:39:00:00/40 tag 5 ncq 20480 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/50:30:37:c3:08/00:00:39:00:00/40 tag 6 ncq 40960 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/58:38:d7:c3:08/00:00:39:00:00/40 tag 7 ncq 45056 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/28:40:2f:c5:08/00:00:39:00:00/40 tag 8 ncq 20480 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:48:47:c6:08/00:00:39:00:00/40 tag 9 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/20:50:57:c5:08/00:00:39:00:00/40 tag 10 ncq 16384 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/70:58:87:c6:08/00:00:39:00:00/40 tag 11 ncq 57344 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:60:7f:c0:08/00:00:39:00:00/40 tag 12 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/20:68:77:c5:08/00:00:39:00:00/40 tag 13 ncq 16384 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/30:70:c7:c1:08/00:00:39:00:00/40 tag 14 ncq 24576 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:78:f7:c1:08/00:00:39:00:00/40 tag 15 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/48:80:f7:c6:08/00:00:39:00:00/40 tag 16 ncq 36864 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/38:88:bf:c0:08/00:00:39:00:00/40 tag 17 ncq 28672 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:90:2f:c4:08/00:00:39:00:00/40 tag 18 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:98:6f:c4:08/00:00:39:00:00/40 tag 19 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:a0:f7:c0:08/00:00:39:00:00/40 tag 20 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/80:a8:37:c2:08/00:00:39:00:00/40 tag 21 ncq 65536 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/80:b0:b7:c2:08/00:00:39:00:00/40 tag 22 ncq 65536 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/28:b8:e7:c5:08/00:00:39:00:00/40 tag 23 ncq 20480 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/50:c0:3f:c7:08/00:00:39:00:00/40 tag 24 ncq 40960 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/50:c8:df:c4:08/00:00:39:00:00/40 tag 25 ncq 40960 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/88:d0:8f:c7:08/00:00:39:00:00/40 tag 26 ncq 69632 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/38:d8:0f:c6:08/00:00:39:00:00/40 tag 27 ncq 28672 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/40:e0:5f:c1:08/00:00:39:00:00/40 tag 28 ncq 32768 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/30:e8:b7:bf:08/00:00:39:00:00/40 tag 29 ncq 24576 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3.00: cmd 60/30:f0:af:c4:08/00:00:39:00:00/40 tag 30 ncq 24576 in Mar 25 22:08:50 Unraid kernel: res 40/00:d4:8f:c7:08/00:00:39:00:00/40 Emask 0x50 (ATA bus error) Mar 25 22:08:50 Unraid kernel: ata3.00: status: { DRDY } Mar 25 22:08:50 Unraid kernel: ata3: hard resetting link Mar 25 22:08:51 Unraid kernel: ata1: softreset failed (device not ready) Mar 25 22:08:51 Unraid kernel: ata1: failed due to HW bug, retry pmp=0 Mar 25 22:08:51 Unraid kernel: ata2: softreset failed (device not ready) Mar 25 22:08:51 Unraid kernel: ata2: failed due to HW bug, retry pmp=0 Mar 25 22:08:51 Unraid kernel: ata4: softreset failed (device not ready) Mar 25 22:08:51 Unraid kernel: ata4: failed due to HW bug, retry pmp=0 Mar 25 22:08:51 Unraid kernel: ata3: softreset failed (device not ready) Mar 25 22:08:51 Unraid kernel: ata3: failed due to HW bug, retry pmp=0 Mar 25 22:08:51 Unraid kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 22:08:51 Unraid kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 22:08:51 Unraid kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 22:08:51 Unraid kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 22:08:51 Unraid kernel: ata2.00: configured for UDMA/133 Mar 25 22:08:51 Unraid kernel: ata2: EH complete Mar 25 22:08:51 Unraid kernel: sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) Mar 25 22:08:51 Unraid kernel: sd 1:0:0:0: [sdb] Write Protect is off Mar 25 22:08:51 Unraid kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Mar 25 22:08:51 Unraid kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 25 22:08:51 Unraid kernel: ata1.00: configured for UDMA/133 Mar 25 22:08:51 Unraid kernel: ata1: EH complete Mar 25 22:08:51 Unraid kernel: sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) Mar 25 22:08:51 Unraid kernel: sd 0:0:0:0: [sda] Write Protect is off Mar 25 22:08:51 Unraid kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Mar 25 22:08:51 Unraid kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 25 22:08:51 Unraid kernel: ata3.00: configured for UDMA/133 Mar 25 22:08:51 Unraid kernel: ata3: EH complete Mar 25 22:08:51 Unraid kernel: ata4.00: configured for UDMA/133 Mar 25 22:08:51 Unraid kernel: ata4: EH complete Mar 25 22:08:51 Unraid kernel: sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) Mar 25 22:08:51 Unraid kernel: sd 2:0:0:0: [sdc] Write Protect is off Mar 25 22:08:51 Unraid kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Mar 25 22:08:51 Unraid kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 25 22:08:51 Unraid kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) Mar 25 22:08:51 Unraid kernel: sd 3:0:0:0: [sdd] Write Protect is off Mar 25 22:08:51 Unraid kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Mar 25 22:08:51 Unraid kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Power consumption with no drives and a Seasonic S12 430w: 47w with onboard audio, serial, parallel, disabled 45w with above + vga clock downclocked to 200mhz from 500mhz 45w with above + ide controller disabled 45w with above + cool&quiet disabled (1.2 stock volts) 42w with above @ 1.1v - 2600mhz (13x multiplier) 40w with above @ 1.0v - 2000mhz (10x multiplier) 38w with above @ 0.9v - 1600mhz (8x multiplier) 35w with above @ 0.8v - 1000mhz (5x multiplier) 35w with above + DDR400 1.8ghz @ .9v and 1.2ghz @ .8 were stable during some limited testing. I expected CnQ to not work but it's still disappointing. One other thing, if two PCI-E x4 cards are used then PCI-E x1 slot 2 & 3 are disabled. Link to comment
smino Posted March 26, 2009 Share Posted March 26, 2009 I noticed something similar on mine as well, but only for ATA4. It happened when both the parity check started and the file mover started at the same time , and the drives were powered off beforehand. I will check my logs tonight. See my post: http://lime-technology.com/forum/index.php?topic=3536.0 Mar 25 23:01:53 Tower kernel: ata4: EH in SWNCQ mode,QC:qc_active 0x3 sactive 0x3 Mar 25 23:01:53 Tower kernel: ata4: SWNCQ:qc_active 0x3 defer_bits 0x0 last_issue_tag 0x1 Mar 25 23:01:53 Tower kernel: dhfis 0x3 dmafis 0x1 sdbfis 0x0 Mar 25 23:01:53 Tower kernel: ata4: ATA_REG 0x40 ERR_REG 0x0 Mar 25 23:01:53 Tower kernel: ata4: tag : dhfis dmafis sdbfis sacitve Mar 25 23:01:53 Tower kernel: ata4: tag 0x0: 1 1 0 1 Mar 25 23:01:53 Tower kernel: ata4: tag 0x1: 1 0 0 1 Mar 25 23:01:53 Tower kernel: ata4: limiting SATA link speed to 1.5 Gbps Mar 25 23:01:53 Tower kernel: ata4.00: exception Emask 0x10 SAct 0x3 SErr 0x1810000 action 0xe frozen Mar 25 23:01:53 Tower kernel: ata4.00: hot unplug Mar 25 23:01:53 Tower kernel: ata4: SError: { PHYRdyChg LinkSeq TrStaTrns } Mar 25 23:01:53 Tower kernel: ata4.00: cmd 60/00:00:e7:b7:00/04:00:00:00:00/40 tag 0 ncq 524288 in Mar 25 23:01:53 Tower kernel: res 40/00:08:e7:bb:00/00:08:e7:bb:00/40 Emask 0x10 (ATA bus error) Mar 25 23:01:53 Tower kernel: ata4.00: status: { DRDY } Mar 25 23:01:53 Tower kernel: ata4.00: cmd 60/98:08:e7:bb:00/01:00:00:00:00/40 tag 1 ncq 208896 in Mar 25 23:01:53 Tower kernel: res 40/00:08:e7:bb:00/00:08:e7:bb:00/40 Emask 0x10 (ATA bus error) Mar 25 23:01:53 Tower kernel: ata4.00: status: { DRDY } Mar 25 23:01:59 Tower kernel: ata4: link is slow to respond, please be patient (ready=0) Mar 25 23:02:03 Tower kernel: ata4: device not ready (errno=-16), forcing hardreset Mar 25 23:02:03 Tower kernel: ata4: soft resetting link Mar 25 23:02:05 Tower kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 23:02:05 Tower kernel: ata4.00: configured for UDMA/133 Mar 25 23:02:05 Tower kernel: ata4: EH complete Mar 25 23:02:05 Tower kernel: sd 4:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) Mar 25 23:02:05 Tower kernel: sd 4:0:0:0: [sdc] Write Protect is off Mar 25 23:02:05 Tower kernel: sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Mar 25 23:02:05 Tower kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 25 23:02:05 Tower kernel: ata4: EH in SWNCQ mode,QC:qc_active 0x4 sactive 0x4 Mar 25 23:02:05 Tower kernel: ata4: SWNCQ:qc_active 0x4 defer_bits 0x0 last_issue_tag 0x2 Mar 25 23:02:05 Tower kernel: dhfis 0x4 dmafis 0x4 sdbfis 0x3 Mar 25 23:02:05 Tower kernel: ata4: ATA_REG 0x40 ERR_REG 0x0 Mar 25 23:02:05 Tower kernel: ata4: tag : dhfis dmafis sdbfis sacitve Mar 25 23:02:05 Tower kernel: ata4: tag 0x2: 1 1 0 1 Mar 25 23:02:05 Tower kernel: ata4.00: exception Emask 0x10 SAct 0x4 SErr 0x1810000 action 0xe frozen Mar 25 23:02:05 Tower kernel: ata4.00: hot unplug Mar 25 23:02:05 Tower kernel: ata4: SError: { PHYRdyChg LinkSeq TrStaTrns } Mar 25 23:02:05 Tower kernel: ata4.00: cmd 60/00:10:e7:c8:00/01:00:00:00:00/40 tag 2 ncq 131072 in Mar 25 23:02:05 Tower kernel: res 40/00:10:e7:c8:00/00:10:e7:c8:00/40 Emask 0x10 (ATA bus error) Mar 25 23:02:05 Tower kernel: ata4.00: status: { DRDY } Mar 25 23:02:11 Tower kernel: ata4: link is slow to respond, please be patient (ready=0) Mar 25 23:02:15 Tower kernel: ata4: device not ready (errno=-16), forcing hardreset Mar 25 23:02:15 Tower kernel: ata4: soft resetting link Mar 25 23:02:16 Tower kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 25 23:02:17 Tower kernel: ata4.00: configured for UDMA/133 Mar 25 23:02:17 Tower kernel: ata4: EH complete Mar 25 23:02:17 Tower kernel: sd 4:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) Mar 25 23:02:17 Tower kernel: sd 4:0:0:0: [sdc] Write Protect is off Mar 25 23:02:17 Tower kernel: sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Mar 25 23:02:17 Tower kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Link to comment
prostuff1 Posted March 27, 2009 Share Posted March 27, 2009 The last couple of lines of those logs looks similar to what I have been getting with one of my drives. It is a Seagate 1TB that was previously my parity drive. I have not had the time to look into it much but it appears to me that it may not be spinning up in time on the first try so unRAID resets it and then all is good. That’s just my guess Link to comment
RobJ Posted March 27, 2009 Share Posted March 27, 2009 There was a SB700 "hiccup" that I don't understand though. (Edit: I saw Tom's post on the SB700 error messages but this has more preceding that error.) That IS a strange "hiccup". It occurred simultaneously on all 4 drives about an hour and a half into a parity check, and after a single hard reset to each of the 4 drives, continues on without any further issues or loss of speed. The whole glitch took only 1 or 2 seconds. It looks like a very brief loss of contact with the entire disk controller, but quickly regained. Perhaps an electrical spike? (I'm also just guessing) Link to comment
Romir Posted April 1, 2009 Author Share Posted April 1, 2009 Mar 30 23:56:18 Tower kernel: md: sync done. time=17978sec rate=81496K/sec Mar 30 23:56:18 Tower kernel: md: recovery thread sync completion status: 0 Parity check log without errors or any other events in the last 48 hours. Link to comment
prostuff1 Posted April 1, 2009 Share Posted April 1, 2009 Mar 30 23:56:18 Tower kernel: md: sync done. time=17978sec rate=81496K/sec Mar 30 23:56:18 Tower kernel: md: recovery thread sync completion status: 0 Parity check log without errors or any other events in the last 48 hours. I got this board added to the Hardware Compatibility Page and have a link back to this thread to show the level 1 testing. Romir it would be great if you could add your stats for the parity check to the User_Benchmarks Page. Link to comment
Romir Posted April 1, 2009 Author Share Posted April 1, 2009 Added below my P5B entry. 82.9 megabytes per second Apr 1 04:45:17 Tower kernel: md: sync done. time=17193sec rate=85217K/sec Apr 1 04:45:17 Tower kernel: md: recovery thread sync completion status: 0 Link to comment
mcs Posted July 1, 2009 Share Posted July 1, 2009 Gigabyte GA-MA780G-UD3H AM2+, AMD 5050e, 2x Corsair 2GB, 4x 1TB WD10EADS, IDE Sata mode Hi, Could you confirm GA-MA780G-UD3H works with the AMD 5050e, the AMD 5050e is not on the GA-MA780G-UD3H supported CPU list. Thanks Link to comment
Romir Posted July 1, 2009 Author Share Posted July 1, 2009 That is exactly what I used and they were the only AM2 parts I've owned. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.