digitalfixer Posted December 14, 2014 Share Posted December 14, 2014 This one is very weird. I bought a Dell H310 to use as a spare HBA. It flashed to LSI P19 IT with no problems and UNRAID is happy with it. All the drives are shown. The problem is one memory slot becomes empty, therefore I lose 8GB of ram. If I reinstall the M1015 both memory slots report have 8GB. If I can't use it as a spare how would I flash it back to the Dell firmware. Kevin. [Edit] I solved it by covering pins B5 & B6 on the card. Link to comment
WeeboTech Posted December 18, 2014 Share Posted December 18, 2014 [Edit] I solved it by covering pins B5 & B6 on the card. How or Where did you get the information to support this? Why those two pins? Link to comment
digitalfixer Posted December 18, 2014 Author Share Posted December 18, 2014 There was a post on the forum about the same problem plus I found a couple of instances on other sites. http://lime-technology.com/forum/index.php?topic=29236.msg262090#msg262090 http://www.vladan.fr/memory-channel-per-bank-getting-non-active-when-using-perc-h310-contoler-card/ http://yannickdekoeijer.blogspot.co.uk/2012/04/modding-dell-perc-6-sas-raidcontroller.html Because I couldn't find any explanation of why this should happen I didn't leave the card in my server. I'll probably keep it as a spare incase my M1015 fails. Kevin. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.