CP WebUI will not load

[JMO]

Hi,

 

I have been busy setting up my first UnRaid box over the past few days, and have encountered an issue with CouchPotato.

 

For whatever reason, I cannot get the CP WebUI to load.

 

Here's a screen of my settings:

 

The funny thing is, it was working, then by means of whatever I changed, it stopped.

 

All I get at:

 

http://192.168.1.250:8082/ 

 

is "This webpage is not available".

 

Suggestions are very welcome.

[Squid]

Is 192.168.1.250 the IP address of your server?

[JMO]

Is 192.168.1.250 the IP address of your server?

 

Yes.

 

e.g.

 

http://192.168.1.250/Docker

[Squid]

What does the CP logs show? (Click on the uptime to bring it up)

[JMO]

EDIT: I deleted the docker, and re-installed, all seems well again.

 

Here's the up-time report:

 

root@localhost:# /usr/bin/docker logs --tail=350 CouchPotato
*** Running /etc/my_init.d/edge.sh...
Downloading source...
Cloning into '/tmp/tmp.13549920915364680'...
*** Running /etc/rc.local...
*** Booting runit daemon...
*** Runit started as PID 24

The command finished successfully!

 

I also have port forwarding configured on my router. 8082-->192.168.1.250

 

EDIT: And from the CP config file:

ssl_key = 
ssl_cert = 
data_dir = 
permission_folder = 0755
development = 0
url_base = 
debug = 0
launch_browser = 0
port = 8082
permission_file = 0644
show_wizard = 0

[Darqfallen]

You don't need port forwarding and change the container port from 5050 to 8082 and it should be fine.

 

The port forwarding is for outside your network, so unless you want to access your Couchpotato from the internet I wouldn't set the port forwarding until I have set a strong password / https.

[JMO]

You don't need port forwarding and change the container port from 5050 to 8082 and it should be fine.

 

Forwarding is off atm.

 

I have some weird behaviour in CP though.

 

If I have the following settings:

 

WebUI: http://192.168.1.250:8082/

Container port: 8082

Host Port: 8082

 

Then CP tries to open the WebUI at: http://192.168.1.250:5050/

 

Which is the wrong port and gives me a webpage not available. Manually changing the port to 8082 in the browser loads the page fine.

 

Alternatively, if I use (note the changed container port):

 

WebUI: http://192.168.1.250:8082/

Container port: 5050

Host Port: 8082

 

CP tries to load at http://192.168.1.250:8082/

 

Which is the correct port, but gives me a webpage unavailable.

 

Not a big deal to edit the port number in the browser/bookmark, and I doubt I will be launching CP directly from the Docker page very often (once I am fully up and going), but still, not exactly what i would call expected behaviour.