14b Problem

[monkeytsar]

Hi,

  I'm looking for some help I've been on Beta 12 for ages now and it was running really well for me but yesterday i decided to update it to 14b. I've got a KVM running XBMCbuntu/Kodibuntu and i've had it up and running for months without any errors or the need to reboot etc. Yesterday after the upgrade the machine started up fine and all seemed well however it now randomly freezes while watching something it could be 10mins in or 90mins in. When it freezes it doesn't register any key presses etc within the VM if i SSH into unraid and run the shutdown command (virsh shutdown XBMCBUNTU) it does shut down I don't have to destroy it I can then start it up and it'll run fine again for another 60mins or so and then it'll freeze again. If i leave it not playing anything back it'll happily sit there for hours waiting so the error only happens when its playing something back. I haven't changed anything in the XML file but i'm aware i've been away from these forums for months so i might have something in my config that may cause problems with the new beta.

 

Would you guys be able to look at my xml below and point out anything that may need altering?

 

<domain type='kvm' id='9' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>XBMCBUNTU</name>
  <memory unit='GB'>2</memory>
  <currentMemory unit='GB'>2</currentMemory>
  <memoryBacking>
    <nosharepages/>
    <locked/>
  </memoryBacking>
  <vcpu placement='static'>2</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='2'/>
    <vcpupin vcpu='1' cpuset='3'/>
  </cputune>
  <resource>
    <partition>/machine</partition>
  </resource>
  <os>
    <type arch='x86_64' machine='pc-q35-2.1'>hvm</type>
    <boot dev='hd'/>
    <bootmenu enable='yes'/>
  </os>
  <features>
    <acpi/>
    <apic/>
  </features>
  <cpu mode='host-passthrough'>
    <topology sockets='2' cores='1' threads='1'/>
  </cpu>
  <clock offset='localtime'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='none' io='native'/>
      <source file='/mnt/cache/VMs/XBMCbuntu/XBMCbuntu.qcow2'/>
      <backingStore/>
      <target dev='vdc' bus='virtio'/>
      <alias name='virtio-disk2'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x03' function='0x0'/>
    </disk>
    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/mnt/cache/VMs/ISO/xbmcbuntu-13.0.iso'/>
      <backingStore/>
      <target dev='hdb' bus='ide'/>
      <readonly/>
      <alias name='ide0-1-0'/>
      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
    </disk>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <alias name='usb0'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <alias name='usb0'/>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <alias name='usb0'/>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <alias name='usb0'/>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x01' function='0x2'/>
    </controller>
    <controller type='sata' index='0'>
      <alias name='sata0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'>
      <alias name='pcie.0'/>
    </controller>
    <controller type='pci' index='1' model='dmi-to-pci-bridge'>
      <alias name='pci.1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1e' function='0x0'/>
    </controller>
    <controller type='pci' index='2' model='pci-bridge'>
      <alias name='pci.2'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x01' function='0x0'/>  
  </controller>
    <controller type='ide' index='0'>
      <alias name='ide0'/>
    </controller>
    <filesystem type='mount' accessmode='passthrough'>
      <source dir='/mnt/user/Media'/>
      <target dir='media'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x05' function='0x0'/>
    </filesystem>
    <interface type='bridge'>
      <mac address='52:94:00:1A:1B:1c'/>
      <source bridge='br0'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x02' function='0x0'/>
    </interface>
    <memballoon model='virtio'>
      <alias name='balloon0'/>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x04' function='0x0'/>
    </memballoon>
  </devices>
  <seclabel type='none' model='none'/>
  <qemu:commandline>
    <qemu:arg value='-device'/>
    <qemu:arg value='ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=1,chassis=1,id=root.1'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='vfio-pci,host=01:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='vfio-pci,host=01:00.1,bus=root.1,addr=00.1'/>
    <qemu:arg value='-device'/>
    <qemu:arg value='vfio-pci,host=00:1a.0,bus=pcie.0'/>
  </qemu:commandline>
</domain>

 

Thanks

 

Luke

[dmacias]

Did you figure it out? Did you try running 12 sharing? You might check your go file for corruption or qemu-img check your qcow.