daze Posted January 25, 2016 Share Posted January 25, 2016 Hi guys, I had my cache drive in a big enclosure connect via an eSata connector, and it showed up and worked fine. Since the big enclosure was huge and unsightly, I placed the 2.5" drive in a small USB enclosure. It gets detected, and even fdisk sees it, but it is not a mountable option as a cache drive. Any ideas? Disk /dev/sdb: 500.1 GB, 500107862016 bytes 1 heads, 63 sectors/track, 15504336 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 64 976773167 488386552 83 Linux Thanks, daze Quote Link to comment
trurl Posted January 25, 2016 Share Posted January 25, 2016 Only SATA supported for parity, array data, and cache drives. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.