hypergolic Posted August 22, 2017 Share Posted August 22, 2017 I followed the procedure below to replace some 2TB drives with an 8TB. https://wiki.lime-technology.com/Replacing_Multiple_Data_Drives_with_a_Single_Larger_Drive I now have the following errors: Share disk1 is identically named to a disk share Share disk2 is identically named to a disk share Edit: So I think my problem was using tab complete and I actually ran the command rsync -avX /mnt/disk1/ /mnt/disk4/ instead of rsync -avX /mnt/disk1/ /mnt/disk4, note the trailing slash. Any suggestions on how to correct this? Thanks! Link to comment
JorgeB Posted August 22, 2017 Share Posted August 22, 2017 1 hour ago, hypergolic said: I followed the procedure below to replace some 2TB drives with an 8TB. You forgot a / or that wouldn't happen, but it's easy to solve, just move everything inside those folders one level up, then delete the diskx folders (check that they're empty before deleting). Link to comment
hypergolic Posted August 23, 2017 Author Share Posted August 23, 2017 20 hours ago, johnnie.black said: You forgot a / or that wouldn't happen, but it's easy to solve, just move everything inside those folders one level up, then delete the diskx folders (check that they're empty before deleting). Yep dumb mistake, thanks for the help! Link to comment
kizer Posted August 23, 2017 Share Posted August 23, 2017 Getting old I've reverted to using simple things like MC aka Midnight Commander via GUI on the machine in question. I know for sure I would of made the same simple mistake myself. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.