mimwdv Posted September 26, 2017 Share Posted September 26, 2017 After what I suspect was a power outage I came back to my server and couldn't reach any drives. When I looked at my main page all my disks are unassigned! Dashboard is reporting SMART as OK, I don't have a record of which disk is which - what do I do next? I'm running 6.1.9, Diagnostics attached. Thanks for your help. media-diagnostics-20170924-1800.zip Link to comment
JorgeB Posted September 26, 2017 Share Posted September 26, 2017 You should have upgraded long time ago, this doesn't happen on v6.2 and above. Assign all disks as data disks (no parity) and start the array, if there's only on unmountable disk it's your parity, if there are more grab and post new diagnostics. Link to comment
mimwdv Posted September 27, 2017 Author Share Posted September 27, 2017 Thanks Johnnie. Once I've fixed this I'll upgrade. I've found my one parity - now what? I tried assigning the unmountable disk as parity but it complains about wrong disks. Link to comment
JorgeB Posted September 27, 2017 Share Posted September 27, 2017 Do another new config, re-assign all disks, including parity in the parity slot, check "parity is already valid" and start the array. Run a parity sync, there will be a few sync errors, it's normal after doing this. Link to comment
mimwdv Posted September 29, 2017 Author Share Posted September 29, 2017 Yes, that's fixed it! Thanks so much, johnnie.black. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.