Etcorbit Posted February 18, 2018 Posted February 18, 2018 Hello, I just recently restarted my server and after the restart i was unable to access the Web GUI via the IP Address/HostName or from the Unraid GUI LocalHost. Things i have attempted so far: Upgrading to 6.4.1 Downgrading to 6.3.5 Specs: 2x Intel Xeon L5640 SuperMirco X8DTL-3F 24GB DDR3 EEC EVGA 500W Iv attached my Diagnostics Zip. Please let me know if you have any suggestions on other steps to try. Thank you tower-diagnostics-20180218-1129.zip
Etcorbit Posted February 18, 2018 Author Posted February 18, 2018 Ok, i Attempted to Access the Web GUI in SAFE mode but had the same result. the Server is pingable from another machine on my local network as well. I have attached the SAFE mode Diagnostics logs as well. Thanks. tower-diagnostics-20180218-1450.zip
Etcorbit Posted February 19, 2018 Author Posted February 19, 2018 I have completed one full pass of memtest and it has passed. I will leave it running over night to see if any fail. Any other thoughts? Thanks
JorgeB Posted February 19, 2018 Posted February 19, 2018 Try booting with a new trial key just to see if anything related to current flash/config.
Etcorbit Posted February 19, 2018 Author Posted February 19, 2018 I created a backup of my Flash Drive and then ran a fresh Make_Bootable on the Drive. I have it up and running in the server and i am able to access the WebGUI from a browser on the same network. base on your suggestion i take it that means there is something wrong with my Flash/Config Files? Thanks
JorgeB Posted February 19, 2018 Posted February 19, 2018 Probably, you can restore your old config file by file to try and find what's the problem or just restore the essential ones (super.dat which contains the disk assignments and your key) and reconfigure the rest.
trurl Posted February 20, 2018 Posted February 20, 2018 1 hour ago, johnnie.black said: reconfigure the rest. Most of the files in the config are text and you can read them to maybe help you figure out which may be bad, or use them as a guide to setting up from scratch.
Etcorbit Posted February 24, 2018 Author Posted February 24, 2018 It is one of the Config Files, i was able to get it all booted back with the proper configuration on most items. I am looking into specifically which File But i have it all up and running now. Thank you Very much!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.