paperblankets Posted June 24, 2018 Share Posted June 24, 2018 Hello, I am setting up gpu pass-through for the first time and think I need some help. The problem: When booting my vm with a bios dump (acquired following these methods from Spaceinvader One: bios modification, general dump usage) 2018-06-24 15:08:41.455+0000: starting up libvirt version: 4.0.0, qemu version: 2.11.1, hostname: HuananTheHydra LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name 'guest=Windows 10,debug-threads=on' -S -object 'secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-11-Windows 10/master-key.aes' -machine pc-i440fx-2.11,accel=kvm,usb=off,dump-guest-core=off,mem-merge=off -cpu host,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff,hv_vendor_id=none -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/9bbfa0b2-3543-fda4-0e7e-1872da3c997c_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 8192 -realtime mlock=off -smp 10,sockets=1,cores=5,threads=2 -uuid 9bbfa0b2-3543-fda4-0e7e-1872da3c997c -display none -no-user-config -nodefaults -chardev 'socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-11-Windows 10/monitor.sock,server,nowait' -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-hpet -no-shutdown -boot strict=on -device TX 1070 Mini ITX OC 8G/modified bios/Gigabyte.GTX1070.mini.rom' -device vfio-pci,host=02:00.1,id=hostdev1,bus=pci.0,addr=0x6 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on 2018-06-24 15:08:41.455+0000: Domain id=11 is tainted: high-privileges 2018-06-24 15:08:41.455+0000: Domain id=11 is tainted: host-cpu 2018-06-24T15:08:41.526591Z qemu-system-x86_64: -chardev pty,id=charserial0: char device redirected to /dev/pts/0 (label charserial0) 2018-06-24T15:08:42.672504Z qemu-system-x86_64: -device vfio-pci,host=02:00.0,id=hostdev0,bus=pci.0,addr=0x5,romfile=/mnt/disk7/gpudumps/GeForce GTX 1070 Mini ITX OC 8G/modified bios/Gigabyte.GTX1070.mini.rom: Failed to mmap 0000:02:00.0 BAR 3. Performance may be slow I came to the conclusion the vm does not boot because: The attached videocard (GeForce GTX 1070 Mini ITX OC 8G) does not output anything The MAC address of the VM never appears on my network. What I have tried: The same vm configuration, with a vnc graphic card (QXL) The same vm configuration, without the bios, with a vnc graphic card (QXL) The same vm configuration, without the bios The same vm configuration, without the bios The attached videocard (GeForce GTX 1070 Mini ITX OC 8G) does not output anything The MAC address of the VM never appears on my network. Code 43 appears The same vm configuration, without the bios, with a vnc graphic card (QXL) The attached videocard (GeForce GTX 1070 Mini ITX OC 8G) does not output anything The MAC address of the VM never appears on my network. Code 43 appears The same vm configuration, with a vnc graphic card (QXL) The MAC address of the VM does appear on my network/I can not remote in The attached videocard (GeForce GTX 1070 Mini ITX OC 8G) does not output anything System information: GPU I am attempting to pass-through: GeForce GTX 1070 Mini ITX OC 8G Unraid 6.5.3 Model: Custom M/B: HUANANZHI - X79 CPU: Intel® Xeon® CPU E5-2670 v2 @ 2.50GHz HVM: Enabled IOMMU: Enabled Cache: 640 kB, 2560 kB, 25600 kB Memory: 32 GB (max. installable capacity 96 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 Kernel: Linux 4.14.49-unRAID x86_64 OpenSSL: 1.0.2o Full details are attached in unraidHardwareDetails.xml Other information: Windows build is 16299 I am attempting to install my nvidia driver via Gerforce Experience, in all the cases above that boot, I am getting Code 43 after reboot (in some cases before) Threads and Videos I looked at before making this post: How to passthrough an nvidia gpu as primary gpu in unRAID Building a 10 core unRAID server from start to finish - Pt-3 Docker containers and VMs (All parts) The best way to install and setup a windows 10 vm as a daily driver or a Gaming VM VIDEO GUIDE***How to pass through an NVIDIA GPU as primary or only gpu in unRAID [Resolved] Primary GPU passthrough I have also attached my modified rom dump for review. Please let me know if I can provide any other details that will help, and don't hesitate to confirm I followed steps in any of the tutorials above because pebkac is a thing. Thanks for your time, vm.xml unraidHardwareDetails.xml Gigabyte.GTX1070.mini.rom Link to comment
eXtremeSHOK Posted September 2, 2019 Share Posted September 2, 2019 did you ever get this fixed / sorted ? Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.