September 12, 20187 yr I cleaned my server after about 9 months of continuous operation, during which time, two of my drives became disabled (probably due to wire disconnect). After rebooting, the contents are emulated even though both drives are now detected by the server (the serials appear in the dropdown) The drives messages are: Quote Parity 2 - MSG: Parity device is disabled Disk 3 - MSG: Device is Disabled, contents emulated I am positive that both drives became unavailable after this cleaning and booting with the drives not connected (and then rebooting made them appear in the dropdown). When I select the correct drives and start the array, it mounts, but the drives show the above errors. How can I tell the server that it is safe to mount them? The content is currently emulated. Thanks! Edited September 12, 20187 yr by lankanmon
September 12, 20187 yr Community Expert If you're sure the disks are OK: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive
Archived
This topic is now archived and is closed to further replies.