Good morning all,

 

Love the new branding guys.

 

So had bit of an issue with my home server this morning.

• noticed a vm didnt have its services running
• unable to access the web interface of unraid
• lights-on console displayed "hangcheck: hangcheck value past margin!" over and over
• was able to perform a software shutdown from the console.
• diagnostics attached
• seems to be running fine at the moment (set troubleshooting mode)
• have not updated to 6.6.1 yet and wont until I work out what the issue is or someone else is able top advise.

 

Thanks in advanced if you manage to take a look.

 

I'll update the thread with a reply at 24, 48, 72.

 

Hardware profile has been updated. Suffice to say 16GB of ECC, Xeon 1230.

storage-diagnostics-20180930-0850.zip

You're getting several NMI events during the parity check, some users fixed this or at least alleviated the problem by lowering the tunables.

 

I also see this repeating over and over, no idea if it's serious, but since it's being going on for a few days likely not:

Quote

Sep 29 04:47:21 storage kernel: kvm [20288]: vcpu2, guest rIP: 0xfffff800b4da9b92 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop

Also, and if possible connect your SSD to one of the onboard SATA ports, since the HBA where it it connected doesn't support trim.

Hi Johnnie Black,

 

Thanks for the info I'll check it out, thanks for the SSD tip too.

Well its been two days and still stable.